Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
VLZ5V6A-GS08

VLZ5V6A-GS08

Introduction

The VLZ5V6A-GS08 is a voltage regulator belonging to the category of electronic components used for regulating and stabilizing voltage levels in various electronic circuits. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Regulating and stabilizing voltage levels in electronic circuits
  • Characteristics: High precision, low dropout voltage, low quiescent current
  • Package: SOT-23-5
  • Essence: Regulates input voltage to a stable output voltage
  • Packaging/Quantity: Typically available in reels of 3000 units

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 1.2V to 5.5V
  • Output Current: 150mA
  • Dropout Voltage: 130mV at 150mA
  • Quiescent Current: 40µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The VLZ5V6A-GS08 has the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. EN (Enable) 4. BYP (Bypass) 5. VOUT (Output Voltage)

Functional Features

  • Low Dropout Voltage: Ensures efficient regulation even with small voltage differentials
  • Low Quiescent Current: Minimizes power consumption during standby or idle modes
  • Thermal Shutdown Protection: Safeguards the device from overheating
  • Short-Circuit Protection: Prevents damage due to short-circuit conditions

Advantages and Disadvantages

Advantages

  • High precision voltage regulation
  • Wide input voltage range
  • Small package size for space-constrained applications

Disadvantages

  • Limited output current capacity
  • Higher dropout voltage compared to some alternatives

Working Principles

The VLZ5V6A-GS08 operates by comparing the reference voltage with the feedback voltage to adjust the pass transistor's resistance, thereby regulating the output voltage. The enable pin allows for control of the regulator's operation, while the bypass pin provides flexibility in noise reduction.

Detailed Application Field Plans

The VLZ5V6A-GS08 is suitable for various applications requiring precise voltage regulation, such as: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable technology - Sensor modules

Detailed and Complete Alternative Models

Some alternative models to the VLZ5V6A-GS08 include: - LM1117 - MCP1700 - XC6206

In summary, the VLZ5V6A-GS08 is a versatile voltage regulator with high precision and low dropout voltage, making it suitable for a wide range of electronic applications.

Word Count: 410

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu VLZ5V6A-GS08 u tehničkim rješenjima

Sure, here are 10 common questions and answers related to the application of VLZ5V6A-GS08 in technical solutions:

  1. What is the maximum voltage rating of VLZ5V6A-GS08?

    • The maximum voltage rating of VLZ5V6A-GS08 is 5.6V.
  2. What is the typical application of VLZ5V6A-GS08?

    • VLZ5V6A-GS08 is commonly used for overvoltage protection in various electronic circuits, such as power supplies, communication equipment, and automotive electronics.
  3. What is the peak pulse current capability of VLZ5V6A-GS08?

    • The peak pulse current capability of VLZ5V6A-GS08 is typically in the range of several tens of amperes.
  4. How does VLZ5V6A-GS08 provide overvoltage protection?

    • VLZ5V6A-GS08 utilizes a transient voltage suppressor (TVS) diode to shunt excess voltage away from sensitive components, thereby protecting them from damage.
  5. Can VLZ5V6A-GS08 be used in high-speed data lines?

    • Yes, VLZ5V6A-GS08 is suitable for use in high-speed data lines, including USB, HDMI, and Ethernet interfaces.
  6. What is the response time of VLZ5V6A-GS08 during an overvoltage event?

    • VLZ5V6A-GS08 has a very fast response time, typically in the nanosecond range, providing quick protection against transient voltage spikes.
  7. Is VLZ5V6A-GS08 RoHS compliant?

    • Yes, VLZ5V6A-GS08 is compliant with the Restriction of Hazardous Substances (RoHS) directive.
  8. What is the operating temperature range of VLZ5V6A-GS08?

    • VLZ5V6A-GS08 is designed to operate within a temperature range of -55°C to 150°C, making it suitable for a wide range of environments.
  9. Can VLZ5V6A-GS08 be used in battery-powered applications?

    • Yes, VLZ5V6A-GS08 can be effectively used in battery-powered applications to protect sensitive electronics from voltage transients.
  10. Does VLZ5V6A-GS08 require any external components for proper operation?

    • VLZ5V6A-GS08 does not require any external components for basic overvoltage protection, but additional circuitry may be needed for specific applications or performance enhancements.