VLZ4V7A-GS08

Product Overview

Category: Integrated Circuit
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: SOT-223
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

Input Voltage Range: 4.5V to 28V
Output Voltage Range: 1.2V to 20V
Maximum Output Current: 500mA
Dropout Voltage: 300mV at 500mA
Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

VIN (Input Voltage)
GND (Ground)
VOUT (Output Voltage)

Functional Features

Low Quiescent Current
Thermal Shutdown Protection
Short-Circuit Protection
Reverse Polarity Protection

Advantages and Disadvantages

Advantages: - Wide Input Voltage Range - Low Dropout Voltage - Thermal and Short-Circuit Protection

Disadvantages: - Limited Maximum Output Current - SOT-223 Package may require additional heat sinking for high power applications

Working Principles

The VLZ4V7A-GS08 is a linear voltage regulator that maintains a stable output voltage by adjusting the resistance between the input and output pins. It operates by comparing the actual output voltage to a reference voltage and adjusting the resistance to minimize the difference.

Detailed Application Field Plans

The VLZ4V7A-GS08 is suitable for various applications requiring a stable voltage supply, such as: - Battery-powered devices - Automotive electronics - Industrial control systems - Portable consumer electronics

Detailed and Complete Alternative Models

LM317 - Adjustable Voltage Regulator
L78xx Series - Fixed Voltage Regulators
LT1086 - Low Dropout Regulator

This content provides a comprehensive overview of the VLZ4V7A-GS08, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu VLZ4V7A-GS08 u tehničkim rješenjima

Sure, here are 10 common questions and answers related to the application of VLZ4V7A-GS08 in technical solutions:

What is the maximum voltage rating for VLZ4V7A-GS08?
- The maximum voltage rating for VLZ4V7A-GS08 is 7V.
What is the typical application of VLZ4V7A-GS08?
- VLZ4V7A-GS08 is commonly used as a voltage regulator in various electronic devices such as mobile phones, tablets, and portable consumer electronics.
What is the output current capability of VLZ4V7A-GS08?
- VLZ4V7A-GS08 has an output current capability of up to 150mA.
Is VLZ4V7A-GS08 suitable for battery-powered applications?
- Yes, VLZ4V7A-GS08 is suitable for battery-powered applications due to its low quiescent current and high efficiency.
What are the key features of VLZ4V7A-GS08?
- The key features of VLZ4V7A-GS08 include low dropout voltage, thermal shutdown protection, and overcurrent protection.
Can VLZ4V7A-GS08 be used in automotive applications?
- Yes, VLZ4V7A-GS08 is suitable for automotive applications, provided it meets the necessary automotive standards and requirements.
What is the operating temperature range for VLZ4V7A-GS08?
- VLZ4V7A-GS08 has an operating temperature range of -40°C to 125°C, making it suitable for a wide range of environments.
Does VLZ4V7A-GS08 require external components for operation?
- VLZ4V7A-GS08 requires only a few external components for stable and reliable operation, making it easy to integrate into designs.
Can VLZ4V7A-GS08 be used in low-power IoT devices?
- Yes, VLZ4V7A-GS08 is well-suited for low-power IoT devices, providing efficient voltage regulation for extended battery life.
Are there any specific layout considerations for using VLZ4V7A-GS08 in a PCB design?
- It is recommended to follow the manufacturer's guidelines for PCB layout to minimize noise and ensure proper thermal management when using VLZ4V7A-GS08 in a design.

I hope these questions and answers provide helpful information about the application of VLZ4V7A-GS08 in technical solutions. Let me know if you need further assistance!