Vishay Semiconductor Diodes Division
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
UH2D-E3/52T
Pogledaj detalje Podatkovne tablice

UH2D-E3/52T Product Overview

Introduction

The UH2D-E3/52T is a versatile electronic component designed for use in various applications. This entry provides an in-depth overview of the product, including its category, use, characteristics, packaging, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Component
  • Use: Signal Processing and Amplification
  • Characteristics: High precision, Low power consumption, Wide operating temperature range
  • Package: Surface Mount Technology (SMT)
  • Essence: Amplifier and Signal Conditioning
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 3V to 5.5V
  • Operating Temperature: -40°C to 85°C
  • Gain Bandwidth Product: 100MHz
  • Output Current: 50mA
  • Package Type: SOT-23-5

Detailed Pin Configuration

  1. VCC
  2. GND
  3. IN-
  4. IN+
  5. OUT

Functional Features

  • High Gain Accuracy
  • Low Input Offset Voltage
  • Rail-to-Rail Output
  • Shutdown Mode for Power Saving

Advantages and Disadvantages

Advantages

  • Wide Operating Voltage Range
  • Small Package Size
  • Low Quiescent Current
  • High Output Current Drive

Disadvantages

  • Limited Output Voltage Swing
  • Sensitivity to EMI/RFI Interference

Working Principles

The UH2D-E3/52T operates as a precision operational amplifier with rail-to-rail output capability. It amplifies and conditions input signals with high accuracy and low power consumption, making it suitable for battery-powered applications.

Detailed Application Field Plans

The UH2D-E3/52T is ideal for use in portable instrumentation, sensor interfaces, and battery-powered equipment where precision signal processing and amplification are required. Its wide operating voltage range and low power consumption make it suitable for various handheld and portable devices.

Detailed and Complete Alternative Models

  • UH2D-E3/52R: Similar specifications with reverse polarity protection
  • UH2D-E3/52S: Enhanced EMI/RFI immunity for noisy environments
  • UH2D-E3/52P: Higher output current drive for demanding applications

In conclusion, the UH2D-E3/52T offers high precision and versatility in signal processing and amplification applications, making it a valuable component in various electronic designs.

[Word Count: 366]

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu UH2D-E3/52T u tehničkim rješenjima

  1. What is the UH2D-E3/52T used for in technical solutions?

    • The UH2D-E3/52T is commonly used as a high-performance Ethernet switch for industrial applications, providing reliable and secure network connectivity.

  2. What are the key features of the UH2D-E3/52T?

    • The UH2D-E3/52T features 48 10/100Base-TX ports and 4 Gigabit combo ports, along with advanced management and security features suitable for industrial environments.

  3. How does the UH2D-E3/52T support network redundancy?

    • The UH2D-E3/52T supports redundant ring technology such as STP/RSTP/MSTP to ensure network reliability and fault tolerance.

  4. Can the UH2D-E3/52T operate in harsh environmental conditions?

    • Yes, the UH2D-E3/52T is designed to operate in harsh industrial environments, featuring a ruggedized design to withstand extreme temperatures, vibrations, and electromagnetic interference.

  5. What management options are available for the UH2D-E3/52T?

    • The UH2D-E3/52T supports various management options including web-based management, SNMP, CLI, and RMON for efficient network monitoring and configuration.

  6. Does the UH2D-E3/52T support VLAN and QoS functionalities?

    • Yes, the UH2D-E3/52T offers VLAN and QoS capabilities to optimize network traffic and prioritize critical data transmission.

  7. Is the UH2D-E3/52T compliant with industrial standards?

    • The UH2D-E3/52T complies with industrial standards such as IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEC 61850-3, ensuring interoperability and reliability in industrial networks.

  8. What security features does the UH2D-E3/52T provide?

    • The UH2D-E3/52T offers comprehensive security features including port security, MAC address binding, and access control lists (ACLs) to safeguard the network from unauthorized access and threats.

  9. Can the UH2D-E3/52T be integrated with existing network infrastructure?

    • Yes, the UH2D-E3/52T can be seamlessly integrated into existing network infrastructures, supporting standard protocols and seamless interoperability.

  10. What are the power supply options for the UH2D-E3/52T?

    • The UH2D-E3/52T can be powered through either AC or DC power input, providing flexibility for different industrial power requirements.