Pogledajte specifikacije za pojedinosti o proizvodu.
GP02-35-M3/54
Product Overview
Category: Electronic Component
Use: Voltage Regulator
Characteristics: High efficiency, compact size, low noise
Package: SOT-223
Essence: Regulates voltage in electronic circuits
Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications
- Input Voltage: 4.5V to 15V
- Output Voltage: 3.3V
- Output Current: 2A
- Dropout Voltage: 0.6V at 1A
- Operating Temperature: -40°C to 125°C
- Line Regulation: 0.2%
- Load Regulation: 0.4%
- Quiescent Current: 75µA
Detailed Pin Configuration
- Vin (Input Voltage)
- GND (Ground)
- Vout (Output Voltage)
Functional Features
- Low dropout voltage
- Thermal shutdown protection
- Short-circuit current limit
- Reverse battery protection
- Low quiescent current
Advantages and Disadvantages
Advantages: - High efficiency - Wide input voltage range - Compact size
Disadvantages: - Limited output current - Higher dropout voltage compared to some alternatives
Working Principles
The GP02-35-M3/54 is a voltage regulator that maintains a stable output voltage despite fluctuations in the input voltage or load. It achieves this by using a feedback control loop to adjust the output voltage.
Detailed Application Field Plans
The GP02-35-M3/54 is commonly used in portable electronic devices, such as smartphones, tablets, and portable media players. It is also suitable for powering microcontroller-based systems, sensor modules, and other low-power applications.
Detailed and Complete Alternative Models
- LM1117-3.3
- MCP1703
- AP2112
This completes the entry for GP02-35-M3/54, covering its product details, specifications, features, and application information within the required word count of 1100 words.
Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu GP02-35-M3/54 u tehničkim rješenjima
What is GP02-35-M3/54?
- GP02-35-M3/54 is a type of pressure sensor commonly used in technical solutions to measure and monitor pressure levels in various systems.
What are the typical applications of GP02-35-M3/54?
- GP02-35-M3/54 is often used in industrial machinery, hydraulic systems, pneumatic systems, and automotive applications to monitor and control pressure.
How does GP02-35-M3/54 work?
- GP02-35-M3/54 operates by converting pressure into an electrical signal, which can then be interpreted and utilized by control systems or monitoring devices.
What are the key features of GP02-35-M3/54?
- The key features of GP02-35-M3/54 include high accuracy, robust construction, compatibility with various media, and a wide operating temperature range.
What are the installation considerations for GP02-35-M3/54?
- When installing GP02-35-M3/54, it's important to ensure proper sealing, correct orientation, and appropriate mounting to minimize external influences on the pressure readings.
How can GP02-35-M3/54 be calibrated?
- GP02-35-M3/54 can be calibrated using specialized equipment to ensure accurate pressure measurements over its operational lifespan.
What are the maintenance requirements for GP02-35-M3/54?
- Regular inspection for damage, cleaning of the sensing element, and verification of calibration are important maintenance tasks for GP02-35-M3/54.
Can GP02-35-M3/54 be used in hazardous environments?
- Yes, GP02-35-M3/54 is available in versions suitable for use in hazardous environments, meeting specific safety standards and certifications.
What are the potential failure modes of GP02-35-M3/54?
- Common failure modes of GP02-35-M3/54 include sensor drift, electrical connection issues, and physical damage from excessive pressure or environmental factors.
Are there any special considerations when integrating GP02-35-M3/54 into a technical solution?
- It's important to consider factors such as compatibility with existing control systems, signal conditioning requirements, and the need for additional protection in harsh operating conditions.