Vishay Semiconductor Diodes Division
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
FES8CTHE3/45
Pogledaj detalje Podatkovne tablice

FES8CTHE3/45

Product Overview

Category

The FES8CTHE3/45 belongs to the category of semiconductor devices.

Use

It is used as a rectifier diode for various electronic applications.

Characteristics

  • High current capability
  • Low forward voltage drop
  • Fast switching speed

Package

The FES8CTHE3/45 comes in a standard surface mount package.

Essence

It is essential for converting alternating current (AC) to direct current (DC) in electronic circuits.

Packaging/Quantity

The product is typically packaged in reels and is available in varying quantities based on customer requirements.

Specifications

  • Maximum Average Forward Current: 8A
  • Reverse Voltage: 45V
  • Forward Voltage Drop: 0.85V at 8A
  • Operating Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The FES8CTHE3/45 has a standard SMC (DO-214AB) package with two pins. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • High current carrying capability
  • Low power loss
  • Fast recovery time

Advantages

  • Efficient conversion of AC to DC
  • Suitable for high-frequency applications
  • Compact size for space-constrained designs

Disadvantages

  • Higher cost compared to standard diodes
  • Sensitive to reverse voltage spikes

Working Principles

The FES8CTHE3/45 operates based on the principle of unidirectional current flow, allowing it to efficiently convert AC input to DC output in electronic circuits.

Detailed Application Field Plans

The FES8CTHE3/45 is commonly used in the following applications: - Power supplies - Battery chargers - Inverters - Motor drives

Detailed and Complete Alternative Models

Some alternative models to the FES8CTHE3/45 include: - FES6CTHE3/45 - FES10CTHE3/45 - FES12CTHE3/45

In conclusion, the FES8CTHE3/45 is a versatile rectifier diode with high current capability and fast switching speed, making it suitable for various electronic applications requiring efficient AC to DC conversion.

[Word Count: 298]

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu FES8CTHE3/45 u tehničkim rješenjima

  1. What is FES8CTHE3/45?

    • FES8CTHE3/45 is a type of Field Effect Switch (FES) commonly used in technical solutions for controlling electrical signals.

  2. How does FES8CTHE3/45 work?

    • FES8CTHE3/45 works by using an electric field to control the conductivity of a semiconductor channel, allowing it to act as a switch for electrical signals.

  3. What are the typical applications of FES8CTHE3/45?

    • FES8CTHE3/45 is commonly used in electronic circuits for signal routing, power management, and voltage regulation.

  4. What are the key specifications of FES8CTHE3/45?

    • The key specifications of FES8CTHE3/45 include its maximum voltage rating, current handling capacity, on-resistance, and switching speed.

  5. How do I integrate FES8CTHE3/45 into my technical solution?

    • To integrate FES8CTHE3/45, you need to consider its pin configuration, voltage and current requirements, and compatibility with other components in your circuit.

  6. What are the advantages of using FES8CTHE3/45 in technical solutions?

    • The advantages of using FES8CTHE3/45 include low power consumption, fast switching speed, and high reliability in controlling electrical signals.

  7. Are there any limitations or considerations when using FES8CTHE3/45?

    • Some considerations when using FES8CTHE3/45 include its temperature range, voltage and current limitations, and potential electromagnetic interference.

  8. Can FES8CTHE3/45 be used in high-power applications?

    • FES8CTHE3/45 is typically designed for low to moderate power applications, so it may not be suitable for high-power scenarios without additional heat dissipation measures.

  9. What are the recommended operating conditions for FES8CTHE3/45?

    • The recommended operating conditions for FES8CTHE3/45 include a specified voltage range, temperature range, and maximum current limits to ensure proper functionality.

  10. Where can I find more information about FES8CTHE3/45 and its application in technical solutions?

    • You can refer to the manufacturer's datasheet, application notes, and technical support resources for detailed information on using FES8CTHE3/45 in technical solutions.