Torex Semiconductor Ltd
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
XC61GN2802HR-G
Pogledaj detalje Podatkovne tablice

XC61GN2802HR-G

Product Overview

Category

XC61GN2802HR-G belongs to the category of electronic components.

Use

It is commonly used in various electronic devices and circuits.

Characteristics

  • Small size
  • High reliability
  • Low power consumption
  • Wide operating temperature range

Package

XC61GN2802HR-G is available in a surface mount package.

Essence

The essence of XC61GN2802HR-G lies in its ability to provide precise voltage regulation in electronic circuits.

Packaging/Quantity

XC61GN2802HR-G is typically packaged in reels or tubes, with varying quantities depending on the supplier.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.8V
  • Output Current: 50mA
  • Dropout Voltage: 100mV (typical)
  • Quiescent Current: 10µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC61GN2802HR-G has three pins:

  1. VIN (Input Voltage)
  2. VOUT (Output Voltage)
  3. GND (Ground)

Functional Features

  • Voltage regulation: XC61GN2802HR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
  • Low quiescent current: The device consumes minimal current when not actively regulating the voltage.

Advantages and Disadvantages

Advantages

  • Small size allows for easy integration into compact electronic designs.
  • High reliability ensures consistent performance over time.
  • Low power consumption helps prolong battery life in portable devices.
  • Wide operating temperature range makes it suitable for various environments.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Higher cost compared to some alternative models.

Working Principles

XC61GN2802HR-G utilizes a voltage reference and feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry accordingly to regulate the output.

Detailed Application Field Plans

XC61GN2802HR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Wearable devices - IoT devices - Battery-powered equipment

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC61GN2802HR-G are: - XC61CN2802MR-G - XC61DN2802NR-G - XC61EN2802LR-G - XC61FN2802KR-G

These models offer similar functionality and characteristics, providing flexibility in design choices.

Word count: 314 words

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu XC61GN2802HR-G u tehničkim rješenjima

Sure! Here are 10 common questions and answers related to the application of XC61GN2802HR-G in technical solutions:

  1. Question: What is XC61GN2802HR-G?
    - Answer: XC61GN2802HR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed for detecting the presence or absence of an input voltage.

  2. Question: What is the operating voltage range of XC61GN2802HR-G?
    - Answer: The operating voltage range of XC61GN2802HR-G is from 0.8V to 6.0V.

  3. Question: What is the output configuration of XC61GN2802HR-G?
    - Answer: XC61GN2802HR-G has an open-drain output configuration, which means it can sink current but cannot source current.

  4. Question: What is the typical quiescent current consumption of XC61GN2802HR-G?
    - Answer: The typical quiescent current consumption of XC61GN2802HR-G is around 1.0µA.

  5. Question: Can XC61GN2802HR-G be used as a power-on reset circuit?
    - Answer: Yes, XC61GN2802HR-G can be used as a power-on reset circuit to monitor the voltage level and generate a reset signal when the voltage rises above a certain threshold.

  6. Question: What is the hysteresis voltage of XC61GN2802HR-G?
    - Answer: The hysteresis voltage of XC61GN2802HR-G is typically 0.08V, which helps to prevent false triggering due to noise or voltage fluctuations.

  7. Question: Is XC61GN2802HR-G suitable for battery-powered applications?
    - Answer: Yes, XC61GN2802HR-G is suitable for battery-powered applications due to its low quiescent current consumption and wide operating voltage range.

  8. Question: Can XC61GN2802HR-G be used in automotive applications?
    - Answer: Yes, XC61GN2802HR-G is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability and performance.

  9. Question: What is the package type of XC61GN2802HR-G?
    - Answer: XC61GN2802HR-G is available in a SOT-23-5 package, which is a small surface-mount package with five pins.

  10. Question: Are there any application notes or reference designs available for XC61GN2802HR-G?
    - Answer: Yes, Torex Semiconductor provides application notes and reference designs on their website, which can help in understanding and implementing XC61GN2802HR-G in various technical solutions.

Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It is always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate and detailed information.