XC61CC3102MR-G belongs to the category of electronic components.
It is commonly used in various electronic devices and circuits.
XC61CC3102MR-G is available in a surface mount package.
The essence of XC61CC3102MR-G lies in its ability to provide accurate voltage regulation in electronic circuits.
XC61CC3102MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
XC61CC3102MR-G has three pins:
XC61CC3102MR-G is a voltage regulator that utilizes a feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry to achieve the desired output voltage, compensating for any input voltage variations.
XC61CC3102MR-G finds applications in various electronic devices and circuits, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices - Battery-powered systems
Some alternative models to XC61CC3102MR-G include: - XC61CC3102MR-G-ND - XC61CC3102MR-G-F - XC61CC3102MR-G-C
These models offer similar functionality and specifications, providing flexibility in design choices.
Word count: 345 words
Sure! Here are 10 common questions and answers related to the application of XC61CC3102MR-G in technical solutions:
Question: What is XC61CC3102MR-G?
- Answer: XC61CC3102MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used for detecting the presence or absence of an input voltage.
Question: What is the operating voltage range of XC61CC3102MR-G?
- Answer: The operating voltage range of XC61CC3102MR-G is from 0.8V to 6.0V.
Question: What is the output configuration of XC61CC3102MR-G?
- Answer: XC61CC3102MR-G has an open-drain output configuration, which means it can sink current but cannot source current.
Question: What is the typical quiescent current consumption of XC61CC3102MR-G?
- Answer: The typical quiescent current consumption of XC61CC3102MR-G is around 1.0µA.
Question: How does XC61CC3102MR-G detect the input voltage?
- Answer: XC61CC3102MR-G uses a built-in voltage reference and comparator to detect the input voltage level. When the input voltage exceeds the detection threshold, the output goes low.
Question: Can XC61CC3102MR-G be used for both high and low voltage detection?
- Answer: Yes, XC61CC3102MR-G can be used for both high and low voltage detection. The detection threshold can be set using external resistors.
Question: What is the response time of XC61CC3102MR-G?
- Answer: The response time of XC61CC3102MR-G is typically 200µs.
Question: Is XC61CC3102MR-G suitable for battery-powered applications?
- Answer: Yes, XC61CC3102MR-G is suitable for battery-powered applications due to its low quiescent current consumption.
Question: Can XC61CC3102MR-G be used in automotive applications?
- Answer: Yes, XC61CC3102MR-G is AEC-Q100 qualified and can be used in automotive applications.
Question: What is the package type of XC61CC3102MR-G?
- Answer: XC61CC3102MR-G is available in a SOT-23-3 package, which is a small surface-mount package with three pins.
Please note that these answers are based on general information about XC61CC3102MR-G and may vary depending on specific application requirements.