Torex Semiconductor Ltd
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
XC61CC2602MR-G
Pogledaj detalje Podatkovne tablice

XC61CC2602MR-G

Product Overview

  • Category: Integrated Circuits (ICs)
  • Use: Voltage Regulator
  • Characteristics: Low Dropout, Low Quiescent Current
  • Package: SOT-23-5
  • Essence: Linear Voltage Regulator
  • Packaging/Quantity: Tape & Reel, 3000 pieces per reel

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 2.6V
  • Dropout Voltage: 0.15V @ 50mA
  • Quiescent Current: 30µA
  • Load Regulation: ±0.5%
  • Line Regulation: ±0.3%
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC61CC2602MR-G is a 5-pin device with the following pin configuration:

  1. GND (Ground)
  2. VIN (Input Voltage)
  3. VOUT (Output Voltage)
  4. NC (No Connection)
  5. EN (Enable)

Functional Features

  • Low dropout voltage ensures stable output even when the input voltage is close to the desired output voltage.
  • Low quiescent current minimizes power consumption in standby or idle mode.
  • Enable pin allows for easy on/off control of the regulator.
  • Excellent load and line regulation provide a stable output voltage under varying conditions.

Advantages and Disadvantages

Advantages: - Low dropout voltage enables efficient regulation even with low input voltages. - Low quiescent current prolongs battery life in portable applications. - Small package size (SOT-23-5) allows for space-saving designs. - Good load and line regulation ensure stable performance.

Disadvantages: - Limited output voltage options (fixed at 2.6V). - Not suitable for high-power applications due to its low current handling capability.

Working Principles

The XC61CC2602MR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with a fraction of the output voltage, adjusting the pass transistor's resistance to maintain a constant output voltage. The dropout voltage is minimized by using a low dropout (LDO) design, which allows for regulation even when the input voltage is only slightly higher than the desired output voltage.

Detailed Application Field Plans

The XC61CC2602MR-G is commonly used in various battery-powered applications, such as:

  1. Portable electronic devices: MP3 players, digital cameras, handheld gaming consoles.
  2. Wireless communication devices: Bluetooth headsets, smartwatches, fitness trackers.
  3. IoT (Internet of Things) devices: Sensors, wearable devices, home automation systems.
  4. Automotive electronics: Infotainment systems, GPS navigation devices, dashboard displays.

Detailed and Complete Alternative Models

  1. XC61CC2602MR-G-ND: Same specifications and package as XC61CC2602MR-G.
  2. XC61CC2602MR-H: Higher output voltage variant (2.8V).
  3. XC61CC2602MR-L: Lower output voltage variant (2.4V).
  4. XC61CC2602MR-K: Adjustable output voltage variant (2.5V to 6.0V).

These alternative models provide flexibility in choosing the appropriate voltage regulator based on specific application requirements.

Word count: 345 words

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu XC61CC2602MR-G u tehničkim rješenjima

Sure! Here are 10 common questions and answers related to the application of XC61CC2602MR-G in technical solutions:

  1. Q: What is XC61CC2602MR-G? A: XC61CC2602MR-G is a voltage detector IC manufactured by Torex Semiconductor. It is commonly used for detecting and monitoring voltage levels in various electronic applications.

  2. Q: What is the operating voltage range of XC61CC2602MR-G? A: The operating voltage range of XC61CC2602MR-G is from 0.8V to 6.0V.

  3. Q: What is the output configuration of XC61CC2602MR-G? A: XC61CC2602MR-G has an open-drain output configuration, which means it can sink current but cannot source current.

  4. Q: How accurate is the voltage detection of XC61CC2602MR-G? A: XC61CC2602MR-G has a typical voltage detection accuracy of ±1.5%.

  5. Q: Can XC61CC2602MR-G be used for overvoltage protection? A: Yes, XC61CC2602MR-G can be used for overvoltage protection by setting the appropriate threshold voltage.

  6. Q: What is the quiescent current consumption of XC61CC2602MR-G? A: The quiescent current consumption of XC61CC2602MR-G is typically 1.0μA.

  7. Q: Is XC61CC2602MR-G suitable for battery-powered applications? A: Yes, XC61CC2602MR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  8. Q: Can XC61CC2602MR-G be used for undervoltage detection? A: Yes, XC61CC2602MR-G can be used for undervoltage detection by setting the appropriate threshold voltage.

  9. Q: What is the response time of XC61CC2602MR-G? A: The response time of XC61CC2602MR-G is typically 200μs.

  10. Q: Can XC61CC2602MR-G be used in automotive applications? A: Yes, XC61CC2602MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

Please note that these answers are general and may vary depending on specific application requirements.