XC61CC2202MR-G belongs to the category of electronic components.
It is commonly used in various electronic devices and circuits for voltage regulation and power management purposes.
XC61CC2202MR-G is available in a small surface mount package, typically SOT-23 or similar.
The essence of XC61CC2202MR-G lies in its ability to provide stable and regulated voltage output, ensuring proper functioning of electronic systems.
XC61CC2202MR-G is usually packaged in reels or tape and reel packaging, with a typical quantity of 3000 units per reel.
XC61CC2202MR-G has three pins:
XC61CC2202MR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.
XC61CC2202MR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Mobile phones - Portable audio players - Wearable devices - IoT devices - Embedded systems
Some alternative models to XC61CC2202MR-G include: - XC61CC2202MR (without the "-G" suffix) - XC61CC2203MR-G - XC61CC2204MR-G - XC61CC2205MR-G
These models offer similar characteristics and specifications, providing flexibility in choosing the most suitable option for specific applications.
Word count: 446 words
Sure! Here are 10 common questions and answers related to the application of XC61CC2202MR-G in technical solutions:
Q: What is XC61CC2202MR-G? A: XC61CC2202MR-G is a specific model of voltage detector IC manufactured by Torex Semiconductor. It is used for monitoring and detecting voltage levels in various electronic circuits.
Q: What is the operating voltage range of XC61CC2202MR-G? A: The operating voltage range of XC61CC2202MR-G is from 0.9V to 6.0V.
Q: How does XC61CC2202MR-G work? A: XC61CC2202MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage exceeds the reference voltage, the output of the IC changes state, indicating the detection of an overvoltage condition.
Q: What is the output configuration of XC61CC2202MR-G? A: XC61CC2202MR-G has an open-drain output configuration, which means it can be connected to other devices through a pull-up resistor to achieve different logic levels.
Q: Can XC61CC2202MR-G be used for undervoltage detection as well? A: No, XC61CC2202MR-G is specifically designed for overvoltage detection only. For undervoltage detection, a different voltage detector IC should be used.
Q: What is the typical quiescent current consumption of XC61CC2202MR-G? A: The typical quiescent current consumption of XC61CC2202MR-G is very low, usually around 1.0µA.
Q: Is XC61CC2202MR-G suitable for battery-powered applications? A: Yes, XC61CC2202MR-G is well-suited for battery-powered applications due to its low quiescent current consumption, which helps in conserving battery life.
Q: Can XC61CC2202MR-G be used in automotive applications? A: Yes, XC61CC2202MR-G is designed to meet the requirements of automotive applications and can operate reliably in automotive environments.
Q: What is the temperature range within which XC61CC2202MR-G can operate? A: XC61CC2202MR-G has an operating temperature range of -40°C to +85°C, making it suitable for a wide range of industrial and commercial applications.
Q: Are there any specific precautions to consider when using XC61CC2202MR-G? A: It is important to ensure that the input voltage does not exceed the maximum specified limit (6.0V) to prevent damage to the IC. Additionally, proper decoupling capacitors should be used as per the manufacturer's recommendations to maintain stability and performance.