XC61CC1802MR-G belongs to the category of electronic components.
It is commonly used in various electronic devices and circuits.
XC61CC1802MR-G is available in a surface mount package.
The essence of XC61CC1802MR-G lies in its ability to provide accurate voltage regulation in electronic circuits.
XC61CC1802MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
XC61CC1802MR-G has three pins:
XC61CC1802MR-G utilizes a voltage reference and feedback control mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry accordingly to regulate the output.
XC61CC1802MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Wearable devices - IoT devices - Battery-powered devices
Some alternative models that offer similar functionality to XC61CC1802MR-G are: - XC61CC1802MR-G-ND - XC61CC1802MR-G-F - XC61CC1802MR-G-H
These models have comparable specifications and can be used as substitutes depending on specific requirements.
Word count: 335 words
Sure! Here are 10 common questions and answers related to the application of XC61CC1802MR-G in technical solutions:
Q: What is XC61CC1802MR-G? A: XC61CC1802MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used for detecting the voltage level in various electronic applications.
Q: What is the operating voltage range of XC61CC1802MR-G? A: The operating voltage range of XC61CC1802MR-G is from 0.8V to 6.0V.
Q: What is the output configuration of XC61CC1802MR-G? A: XC61CC1802MR-G has an open-drain output configuration, which means it can sink current but cannot source current.
Q: What is the typical quiescent current consumption of XC61CC1802MR-G? A: The typical quiescent current consumption of XC61CC1802MR-G is around 1.0µA.
Q: Can XC61CC1802MR-G be used for overvoltage protection? A: No, XC61CC1802MR-G is not designed for overvoltage protection. It is primarily used for voltage detection and monitoring purposes.
Q: What is the response time of XC61CC1802MR-G? A: The response time of XC61CC1802MR-G is typically 200µs.
Q: Is XC61CC1802MR-G suitable for battery-powered applications? A: Yes, XC61CC1802MR-G is suitable for battery-powered applications due to its low quiescent current consumption.
Q: Can XC61CC1802MR-G be used in automotive applications? A: Yes, XC61CC1802MR-G is suitable for automotive applications as it can operate within the specified temperature range of -40°C to +105°C.
Q: Does XC61CC1802MR-G have any built-in hysteresis? A: Yes, XC61CC1802MR-G has a built-in hysteresis of typically 50mV, which helps prevent oscillation near the detection threshold.
Q: What is the package type of XC61CC1802MR-G? A: XC61CC1802MR-G is available in a SOT-23-5 package, which is a small surface-mount package with five pins.
Please note that these answers are based on general information and may vary depending on the specific application requirements.