Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
XC6124E449ER-G

XC6124E449ER-G

Product Overview

Category

XC6124E449ER-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124E449ER-G is available in a small surface-mount package.

Essence

The essence of XC6124E449ER-G lies in its ability to regulate voltage with high efficiency and low dropout voltage, making it suitable for various electronic applications.

Packaging/Quantity

XC6124E449ER-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.49V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 35µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124E449ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6124E449ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the output current to prevent damage.
  • Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • Small size allows for space-saving designs.
  • High efficiency reduces power dissipation.
  • Wide input voltage range provides flexibility in various applications.
  • Overcurrent and thermal shutdown protection enhance circuit reliability.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may affect performance in low input voltage scenarios.

Working Principles

XC6124E449ER-G operates based on the principle of a linear voltage regulator. It uses a feedback mechanism to compare the output voltage with a reference voltage, adjusting the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

XC6124E449ER-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124E449ER-G are: - XC6206P449MR-G - LM1117MPX-4.49/NOPB - MCP1700T-4492E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, XC6124E449ER-G is a compact and efficient voltage regulator with a wide range of applications. Its high efficiency, small size, and protective features make it an ideal choice for various electronic circuits.

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu XC6124E449ER-G u tehničkim rješenjima

Sure! Here are 10 common questions and answers related to the application of XC6124E449ER-G in technical solutions:

  1. Question: What is XC6124E449ER-G?
    - Answer: XC6124E449ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level in electronic systems and provide accurate detection and reset functions.

  2. Question: What is the operating voltage range of XC6124E449ER-G?
    - Answer: The operating voltage range of XC6124E449ER-G is from 0.8V to 6.0V.

  3. Question: What is the typical supply current of XC6124E449ER-G?
    - Answer: The typical supply current of XC6124E449ER-G is 1.0μA (microampere).

  4. Question: Can XC6124E449ER-G be used in battery-powered applications?
    - Answer: Yes, XC6124E449ER-G is suitable for battery-powered applications due to its low supply current and wide operating voltage range.

  5. Question: What is the output configuration of XC6124E449ER-G?
    - Answer: XC6124E449ER-G has an open-drain output configuration.

  6. Question: What is the accuracy of the voltage detection threshold in XC6124E449ER-G?
    - Answer: The voltage detection threshold accuracy of XC6124E449ER-G is ±1.5%.

  7. Question: Can XC6124E449ER-G be used for overvoltage protection?
    - Answer: No, XC6124E449ER-G is not designed for overvoltage protection. It is primarily used for voltage monitoring and reset functions.

  8. Question: What is the typical reset delay time of XC6124E449ER-G?
    - Answer: The typical reset delay time of XC6124E449ER-G is 200ms (milliseconds).

  9. Question: Is XC6124E449ER-G compatible with both CMOS and TTL logic levels?
    - Answer: Yes, XC6124E449ER-G is compatible with both CMOS and TTL logic levels.

  10. Question: Can XC6124E449ER-G be used in automotive applications?
    - Answer: Yes, XC6124E449ER-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

Please note that these answers are based on general information about XC6124E449ER-G. It is always recommended to refer to the datasheet and consult with the manufacturer for specific application requirements.