Pogledajte specifikacije za pojedinosti o proizvodu.
XC6124A250ER-G
Product Overview
Category
XC6124A250ER-G belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Short circuit protection
Package
XC6124A250ER-G is available in a small SOT-23-5 package.
Essence
The essence of XC6124A250ER-G lies in its ability to provide stable and regulated voltage output for various electronic devices.
Packaging/Quantity
It is typically packaged in reels, with each reel containing a specific quantity of XC6124A250ER-G units.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 2.5V
- Dropout Voltage: 200mV @ 100mA
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6124A250ER-G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- EN (Enable)
- NC (No Connection)
- VOUT (Output Voltage)
Functional Features
- High Precision Regulation: The XC6124A250ER-G provides precise voltage regulation, ensuring stable and accurate output.
- Low Dropout Voltage: With a low dropout voltage, it can maintain a stable output even when the input voltage is close to the desired output voltage.
- Low Quiescent Current: The device consumes minimal current when in standby mode, conserving power.
- Thermal Shutdown Protection: It incorporates thermal shutdown protection to prevent damage due to excessive heat.
- Short Circuit Protection: XC6124A250ER-G is equipped with short circuit protection, safeguarding the device and connected components.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures reliable performance.
- Low dropout voltage allows for efficient power conversion.
- Low quiescent current minimizes power consumption.
- Thermal shutdown and short circuit protection enhance safety and durability.
Disadvantages
- Limited output voltage options (fixed at 2.5V).
- Not suitable for applications requiring higher output voltages.
Working Principles
XC6124A250ER-G operates by comparing the output voltage to a reference voltage. It adjusts the internal circuitry to maintain a stable output voltage, compensating for any fluctuations in the input voltage or load conditions.
Detailed Application Field Plans
XC6124A250ER-G finds application in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Embedded systems - Wearable devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6124A250ER-G are: - XC6206P252MR-G - LM1117IMPX-2.5/NOPB - MCP1700T-2502E/TT
These models offer similar functionality and specifications, providing flexibility in choosing the most suitable voltage regulator for specific applications.
Word count: 398 words
Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu XC6124A250ER-G u tehničkim rješenjima
Sure! Here are 10 common questions and answers related to the application of XC6124A250ER-G in technical solutions:
Q: What is XC6124A250ER-G? A: XC6124A250ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC6124A250ER-G? A: The operating voltage range of XC6124A250ER-G is from 0.8V to 6.0V.
Q: How does XC6124A250ER-G work? A: XC6124A250ER-G continuously monitors the input voltage and provides a reset signal when the voltage falls below a certain threshold. This can be used to trigger actions or protect sensitive components during power fluctuations.
Q: What is the output type of XC6124A250ER-G? A: XC6124A250ER-G has an open-drain output, which means it can be connected to other devices with different voltage levels.
Q: Can XC6124A250ER-G be used in battery-powered applications? A: Yes, XC6124A250ER-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: What is the accuracy of the voltage detection in XC6124A250ER-G? A: The voltage detection accuracy of XC6124A250ER-G is ±2.0%.
Q: Does XC6124A250ER-G have built-in hysteresis? A: Yes, XC6124A250ER-G has built-in hysteresis, which helps to prevent false triggering due to voltage fluctuations or noise.
Q: Can XC6124A250ER-G be used in automotive applications? A: Yes, XC6124A250ER-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: What is the temperature range of XC6124A250ER-G? A: XC6124A250ER-G has an operating temperature range of -40°C to +85°C.
Q: Is XC6124A250ER-G available in different package options? A: Yes, XC6124A250ER-G is available in various package options, including SOT-25 and USP-4B, providing flexibility for different design requirements.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application guidelines provided by the manufacturer.