Torex Semiconductor Ltd
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
XC6123E621MR-G
Pogledaj detalje Podatkovne tablice

XC6123E621MR-G

Product Overview

Category

XC6123E621MR-G belongs to the category of voltage regulators.

Use

It is commonly used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • Voltage regulation
  • Stabilization of output voltage
  • Compact size
  • Low power consumption

Package

XC6123E621MR-G is available in a small surface-mount package.

Essence

The essence of XC6123E621MR-G lies in its ability to provide stable voltage output for various electronic devices.

Packaging/Quantity

The product is typically packaged in reels or tape and reel packaging, with a specific quantity per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (at 100mA)
  • Quiescent Current: 30µA (typical)

Detailed Pin Configuration

XC6123E621MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6123E621MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device includes built-in protection against excessive current flow.
  • Thermal shutdown: It incorporates a thermal shutdown feature to prevent overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Low power consumption helps conserve energy.
  • Provides stable voltage output even under varying load conditions.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage may affect efficiency in low input voltage scenarios.

Working Principles

XC6123E621MR-G operates based on a feedback mechanism that continuously monitors the output voltage and adjusts it to maintain stability. It utilizes internal circuitry to regulate the voltage and protect against overcurrent and thermal issues.

Detailed Application Field Plans

XC6123E621MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Wearable devices - IoT devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6123E621MR-G are: - XC6123E622MR-G - XC6123E623MR-G - XC6123E624MR-G - XC6123E625MR-G

These models offer similar functionality and characteristics, providing flexibility in design choices.

Word count: 305 words

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu XC6123E621MR-G u tehničkim rješenjima

Sure! Here are 10 common questions and answers related to the application of XC6123E621MR-G in technical solutions:

  1. Question: What is XC6123E621MR-G?
    - Answer: XC6123E621MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6123E621MR-G?
    - Answer: The operating voltage range of XC6123E621MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6123E621MR-G help in technical solutions?
    - Answer: XC6123E621MR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level. This ensures proper system initialization and prevents data corruption.

  4. Question: What is the output type of XC6123E621MR-G?
    - Answer: XC6123E621MR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.

  5. Question: What is the typical reset threshold voltage of XC6123E621MR-G?
    - Answer: The typical reset threshold voltage of XC6123E621MR-G is 2.6V.

  6. Question: Can XC6123E621MR-G be used in battery-powered applications?
    - Answer: Yes, XC6123E621MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.

  7. Question: Does XC6123E621MR-G have a built-in delay circuit?
    - Answer: Yes, XC6123E621MR-G has a built-in delay circuit that ensures a stable reset signal is provided for a specified duration (typically 200ms) after the power supply voltage rises above the threshold.

  8. Question: What is the package type of XC6123E621MR-G?
    - Answer: XC6123E621MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.

  9. Question: Can XC6123E621MR-G be used in automotive applications?
    - Answer: Yes, XC6123E621MR-G is AEC-Q100 qualified, making it suitable for automotive applications where reliability and performance under harsh conditions are required.

  10. Question: Are there any additional features or protections in XC6123E621MR-G?
    - Answer: Yes, XC6123E621MR-G includes features like overcurrent protection, reverse current blocking, and thermal shutdown to ensure safe operation and protect the device from damage.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.