Pogledajte specifikacije za pojedinosti o proizvodu.
XC6122F631ER-G
Product Overview
Category
XC6122F631ER-G belongs to the category of electronic components.
Use
It is used in various electronic devices and circuits for voltage regulation and power management purposes.
Characteristics
- Voltage regulation capabilities
- Power management features
- Compact size
- Low power consumption
- High efficiency
Package
XC6122F631ER-G comes in a small surface-mount package.
Essence
The essence of XC6122F631ER-G lies in its ability to regulate voltage and manage power efficiently in electronic systems.
Packaging/Quantity
XC6122F631ER-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input Voltage Range: 1.8V - 6.0V
- Output Voltage Range: 0.8V - 5.0V
- Maximum Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 1μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6122F631ER-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- CE: Chip enable pin
Functional Features
- Voltage regulation: XC6122F631ER-G ensures a stable output voltage within the specified range.
- Power management: It efficiently manages power consumption, reducing energy waste.
- Overcurrent protection: The device incorporates overcurrent protection to prevent damage to the circuitry.
- Thermal shutdown: In case of excessive temperature, the device shuts down to avoid overheating.
Advantages and Disadvantages
Advantages
- Small form factor allows for easy integration into compact electronic devices.
- Low power consumption helps in extending battery life.
- High efficiency ensures minimal energy loss during voltage regulation.
Disadvantages
- Limited maximum output current may not be suitable for high-power applications.
- Dropout voltage of 200mV may affect the overall system performance in low-voltage scenarios.
Working Principles
XC6122F631ER-G operates based on a voltage regulation principle known as a linear regulator. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, regardless of input voltage fluctuations.
Detailed Application Field Plans
XC6122F631ER-G finds applications in various electronic systems, including but not limited to: - Mobile devices - Wearable devices - IoT devices - Portable electronics - Battery-powered systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6122F631ER-G are: - XC6122F631MR-G - XC6122F631NR-G - XC6122F631PR-G - XC6122F631QR-G
These models have similar specifications and functionalities, providing flexibility in choosing the most suitable option for specific applications.
Word count: 409 words
Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu XC6122F631ER-G u tehničkim rješenjima
Sure! Here are 10 common questions and answers related to the application of XC6122F631ER-G in technical solutions:
Question: What is XC6122F631ER-G?
- Answer: XC6122F631ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.Question: What is the operating voltage range of XC6122F631ER-G?
- Answer: The operating voltage range of XC6122F631ER-G is typically between 0.8V and 6.0V.Question: What is the output type of XC6122F631ER-G?
- Answer: XC6122F631ER-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor.Question: What is the typical quiescent current consumption of XC6122F631ER-G?
- Answer: The typical quiescent current consumption of XC6122F631ER-G is very low, usually around 1.0µA.Question: Can XC6122F631ER-G be used for overvoltage detection?
- Answer: No, XC6122F631ER-G is specifically designed for undervoltage detection. It triggers an output signal when the monitored voltage falls below a certain threshold.Question: What is the accuracy of the undervoltage detection threshold in XC6122F631ER-G?
- Answer: The accuracy of the undervoltage detection threshold in XC6122F631ER-G is typically ±2%.Question: Can XC6122F631ER-G be used in battery-powered applications?
- Answer: Yes, XC6122F631ER-G is suitable for battery-powered applications due to its low quiescent current consumption.Question: What is the maximum operating temperature range of XC6122F631ER-G?
- Answer: The maximum operating temperature range of XC6122F631ER-G is typically between -40°C and +85°C.Question: Can XC6122F631ER-G be used in automotive applications?
- Answer: Yes, XC6122F631ER-G is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability.Question: How can XC6122F631ER-G be connected in a circuit?
- Answer: XC6122F631ER-G requires a power supply voltage (VDD) connection, ground connection (GND), and an external pull-up resistor connected to the output pin (OUT). The monitored voltage is connected to the input pin (VIN).
Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.