XC6122E621MR-G

Product Overview

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

Package: SOT-25
Essence: Low power consumption, high accuracy voltage regulation
Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

The specifications of XC6122E621MR-G are as follows:

Input Voltage Range: 1.8V to 6.0V
Output Voltage Range: 1.2V to 5.5V
Output Current: 200mA (max)
Dropout Voltage: 160mV (typ)
Quiescent Current: 1µA (typ)

Detailed Pin Configuration

XC6122E621MR-G has the following pin configuration:

VIN: Input voltage pin
GND: Ground pin
VOUT: Output voltage pin

Functional Features

The functional features of XC6122E621MR-G include:

Low power consumption
High accuracy voltage regulation
Overcurrent protection
Thermal shutdown protection

Advantages and Disadvantages

Advantages: - Low dropout voltage - Wide input voltage range - Small package size

Disadvantages: - Limited output current capacity

Working Principles

XC6122E621MR-G operates based on the principle of linear voltage regulation. It uses a feedback mechanism to maintain a stable output voltage regardless of changes in the input voltage or load conditions. The internal circuitry adjusts the resistance to regulate the output voltage within the specified range.

Detailed Application Field Plans

XC6122E621MR-G finds applications in various electronic devices and systems, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models to XC6122E621MR-G that provide similar functionality are: - XC6206P332MR-G - XC6206P502MR-G - XC6206P182MR-G - XC6206P252MR-G

These models offer different output voltage ranges and current capacities, allowing users to choose the most suitable option for their specific requirements.

Word count: 265 words

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu XC6122E621MR-G u tehničkim rješenjima

Sure! Here are 10 common questions and answers related to the application of XC6122E621MR-G in technical solutions:

Question: What is XC6122E621MR-G?
- Answer: XC6122E621MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.
Question: What is the operating voltage range of XC6122E621MR-G?
- Answer: The operating voltage range of XC6122E621MR-G is from 0.6V to 6.0V.
Question: What is the output type of XC6122E621MR-G?
- Answer: XC6122E621MR-G has an open-drain output type.
Question: What is the quiescent current consumption of XC6122E621MR-G?
- Answer: The quiescent current consumption of XC6122E621MR-G is typically 1.0µA.
Question: Can XC6122E621MR-G be used for overvoltage detection?
- Answer: No, XC6122E621MR-G is specifically designed for undervoltage detection only.
Question: What is the hysteresis voltage of XC6122E621MR-G?
- Answer: The hysteresis voltage of XC6122E621MR-G is typically 0.1V.
Question: What is the accuracy of the voltage detection threshold in XC6122E621MR-G?
- Answer: The accuracy of the voltage detection threshold in XC6122E621MR-G is ±1.5%.
Question: Can XC6122E621MR-G be used in automotive applications?
- Answer: Yes, XC6122E621MR-G is AEC-Q100 qualified and can be used in automotive applications.
Question: What is the temperature range for operation of XC6122E621MR-G?
- Answer: XC6122E621MR-G has an operating temperature range of -40°C to +85°C.
Question: Does XC6122E621MR-G have built-in delay circuitry?
- Answer: No, XC6122E621MR-G does not have built-in delay circuitry. If a delay is required, an external capacitor can be connected to the CT pin.

Please note that these answers are based on general information about XC6122E621MR-G and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed technical specifications and guidelines.