XC6122A421MR-G belongs to the category of voltage regulators.
It is used to regulate and stabilize the voltage in electronic circuits.
XC6122A421MR-G is packaged in a SOT-23-5 package.
The essence of XC6122A421MR-G is to provide a stable output voltage despite variations in the input voltage.
XC6122A421MR-G is typically available in reels containing 3000 units.
XC6122A421MR-G has the following pin configuration:
XC6122A421MR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a constant output voltage.
XC6122A421MR-G can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronic devices - IoT devices - Consumer electronics - Industrial control systems
Some alternative models to XC6122A421MR-G are: - XC6122B421MR-G: Similar specifications but with a different output voltage of 4.2V - XC6122C421MR-G: Similar specifications but with a different output voltage of 4.2V and higher maximum output current of 300mA - XC6122D421MR-G: Similar specifications but with a different output voltage of 4.2V and lower dropout voltage of 150mV
These alternative models provide options for different voltage and current requirements in various applications.
Word count: 456 words
Sure! Here are 10 common questions and answers related to the application of XC6122A421MR-G in technical solutions:
Question: What is XC6122A421MR-G?
Answer: XC6122A421MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Question: What is the operating voltage range of XC6122A421MR-G?
Answer: The operating voltage range of XC6122A421MR-G is from 0.8V to 6.0V.
Question: What is the output type of XC6122A421MR-G?
Answer: XC6122A421MR-G has an open-drain output type, which means it can be connected to other devices or circuits with a pull-up resistor.
Question: What is the typical quiescent current consumption of XC6122A421MR-G?
Answer: The typical quiescent current consumption of XC6122A421MR-G is around 1.0µA.
Question: Can XC6122A421MR-G detect both overvoltage and undervoltage conditions?
Answer: No, XC6122A421MR-G is specifically designed to detect undervoltage conditions only.
Question: What is the threshold voltage of XC6122A421MR-G?
Answer: The threshold voltage of XC6122A421MR-G is fixed at 4.2V.
Question: How does XC6122A421MR-G indicate an undervoltage condition?
Answer: When an undervoltage condition is detected, the output of XC6122A421MR-G goes low (logic level "0").
Question: Can XC6122A421MR-G be used in battery-powered applications?
Answer: Yes, XC6122A421MR-G is suitable for battery-powered applications due to its low quiescent current consumption.
Question: What is the package type of XC6122A421MR-G?
Answer: XC6122A421MR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.
Question: Is XC6122A421MR-G RoHS compliant?
Answer: Yes, XC6122A421MR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.
Please note that these answers are based on general information and may vary depending on specific application requirements.