Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
XC6121D416ER-G

XC6121D416ER-G

Product Overview

Category

XC6121D416ER-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact size
  • Low power consumption

Package

XC6121D416ER-G comes in a small surface-mount package.

Essence

The essence of XC6121D416ER-G lies in its ability to provide stable voltage output for various electronic devices.

Packaging/Quantity

XC6121D416ER-G is typically packaged in reels and is available in large quantities.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.16V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6121D416ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation within a specified range
  • Low dropout voltage ensures efficient power conversion
  • Low quiescent current for reduced power consumption
  • Thermal shutdown protection to prevent overheating

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into circuit designs
  • Stable voltage output ensures reliable performance of connected devices
  • Low power consumption contributes to energy efficiency

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Narrow input voltage range restricts compatibility with certain systems

Working Principles

XC6121D416ER-G operates by comparing the output voltage with a reference voltage. Any deviation from the desired output voltage is corrected by adjusting the internal circuitry, ensuring a stable output.

Detailed Application Field Plans

XC6121D416ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6121D416ER-G are: - XC6206P416MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, XC6121D416ER-G is a voltage regulator that provides stable voltage output for electronic devices. Its compact size, low power consumption, and thermal shutdown protection make it suitable for a wide range of applications. However, its limited output current and narrow input voltage range should be taken into consideration when selecting an alternative model.

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu XC6121D416ER-G u tehničkim rješenjima

Sure! Here are 10 common questions and answers related to the application of XC6121D416ER-G in technical solutions:

Q1: What is XC6121D416ER-G? A1: XC6121D416ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

Q2: What is the operating voltage range of XC6121D416ER-G? A2: The operating voltage range of XC6121D416ER-G is from 0.8V to 6.0V.

Q3: What is the output type of XC6121D416ER-G? A3: XC6121D416ER-G has an open-drain output type.

Q4: What is the typical quiescent current consumption of XC6121D416ER-G? A4: The typical quiescent current consumption of XC6121D416ER-G is 1.0µA.

Q5: What is the purpose of using XC6121D416ER-G in a technical solution? A5: XC6121D416ER-G is used to monitor the voltage level of a power supply and provide a signal when it falls below or exceeds a certain threshold, enabling safe shutdown or triggering specific actions in the system.

Q6: Can XC6121D416ER-G be used in battery-powered applications? A6: Yes, XC6121D416ER-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

Q7: What is the accuracy of the voltage detection threshold in XC6121D416ER-G? A7: The accuracy of the voltage detection threshold in XC6121D416ER-G is ±1.5%.

Q8: Can XC6121D416ER-G be used in automotive applications? A8: Yes, XC6121D416ER-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

Q9: Does XC6121D416ER-G have built-in hysteresis? A9: Yes, XC6121D416ER-G has built-in hysteresis to prevent output oscillation near the detection threshold.

Q10: What is the package type of XC6121D416ER-G? A10: XC6121D416ER-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that these answers are general and may vary depending on the specific application requirements and datasheet of XC6121D416ER-G.