XC6121C421MR-G belongs to the category of voltage regulators.
It is used to regulate and stabilize voltage levels in electronic circuits.
XC6121C421MR-G is available in a SOT-23-5 package. It is typically sold in reels containing a quantity of 3000 units per reel.
The XC6121C421MR-G has a total of five pins arranged as follows:
```
| | --| |-- |____| ```
Pin 1: VIN (Input Voltage) Pin 2: GND (Ground) Pin 3: EN (Enable) Pin 4: VOUT (Output Voltage) Pin 5: NC (No Connection)
The XC6121C421MR-G is a linear voltage regulator that operates by comparing the output voltage with a reference voltage. It adjusts the resistance in the circuit to maintain a stable output voltage, regardless of changes in the input voltage or load conditions. The enable pin allows for control of the regulator's operation, providing flexibility in power management.
The XC6121C421MR-G is commonly used in various electronic devices and systems, including:
Here are some alternative models that can be considered as replacements for XC6121C421MR-G:
These models offer similar specifications and functionality, providing options for different design requirements.
In conclusion, the XC6121C421MR-G is a voltage regulator with a wide input voltage range, low dropout voltage, and compact package. It offers stable output voltage and efficient power conversion, making it suitable for various electronic applications. However, its limited maximum output current and five-pin configuration should be considered when selecting alternative models.
Sure! Here are 10 common questions and answers related to the application of XC6121C421MR-G in technical solutions:
Q1: What is XC6121C421MR-G? A1: XC6121C421MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q2: What is the operating voltage range of XC6121C421MR-G? A2: The operating voltage range of XC6121C421MR-G is from 0.8V to 6.0V.
Q3: What is the output type of XC6121C421MR-G? A3: XC6121C421MR-G has an open-drain output type.
Q4: What is the typical quiescent current of XC6121C421MR-G? A4: The typical quiescent current of XC6121C421MR-G is 1.0µA.
Q5: What is the accuracy of the detection voltage of XC6121C421MR-G? A5: The accuracy of the detection voltage of XC6121C421MR-G is ±1.0%.
Q6: Can XC6121C421MR-G be used for overvoltage detection? A6: No, XC6121C421MR-G is specifically designed for undervoltage detection only.
Q7: What is the maximum operating temperature range of XC6121C421MR-G? A7: The maximum operating temperature range of XC6121C421MR-G is -40°C to +85°C.
Q8: Does XC6121C421MR-G have built-in hysteresis? A8: Yes, XC6121C421MR-G has built-in hysteresis to prevent output oscillation caused by voltage fluctuations.
Q9: Can XC6121C421MR-G be used in battery-powered applications? A9: Yes, XC6121C421MR-G is suitable for battery-powered applications due to its low quiescent current.
Q10: What is the package type of XC6121C421MR-G? A10: XC6121C421MR-G is available in a SOT-25 package.
Please note that these answers are based on general information and it is always recommended to refer to the datasheet or consult with the manufacturer for specific details and application requirements.