Pogledajte specifikacije za pojedinosti o proizvodu.
XC6118N16AMR-G
Product Overview
Category
XC6118N16AMR-G belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize the voltage in electronic circuits.
Characteristics
- Small size
- Low power consumption
- High efficiency
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
XC6118N16AMR-G comes in a compact surface-mount package.
Essence
The essence of XC6118N16AMR-G is its ability to provide stable and regulated voltage output for various electronic devices.
Packaging/Quantity
The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 1.6V
- Output Current: 100mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6118N16AMR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- EN: Enable pin (optional)
Functional Features
- Voltage regulation: XC6118N16AMR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: The device automatically shuts down if the output current exceeds the specified limit.
- Thermal shutdown protection: In case of excessive temperature, the regulator enters a thermal shutdown mode to prevent damage.
Advantages and Disadvantages
Advantages
- Small size allows for easy integration into compact electronic devices.
- Low power consumption helps to conserve energy.
- Wide input voltage range makes it compatible with various power sources.
- Overcurrent and thermal shutdown protection enhance the safety and reliability of the circuit.
Disadvantages
- Limited output current capacity may not be suitable for high-power applications.
- Fixed output voltage may not be adjustable for specific requirements.
Working Principles
XC6118N16AMR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for changes in input voltage and load conditions.
Detailed Application Field Plans
XC6118N16AMR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6118N16AMR-G are: - LM1117-1.6V - MCP1700-1.6V - TS1117-1.6V - LP2985-1.6V
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
Word count: 389 words
Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu XC6118N16AMR-G u tehničkim rješenjima
Sure! Here are 10 common questions and answers related to the application of XC6118N16AMR-G in technical solutions:
Q: What is XC6118N16AMR-G? A: XC6118N16AMR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when it falls below a certain threshold.
Q: What is the operating voltage range of XC6118N16AMR-G? A: The operating voltage range of XC6118N16AMR-G is typically between 0.9V and 6.0V.
Q: How does XC6118N16AMR-G help in technical solutions? A: XC6118N16AMR-G helps in technical solutions by ensuring proper system operation and preventing data corruption or malfunctioning caused by low voltage conditions.
Q: Can XC6118N16AMR-G be used in battery-powered applications? A: Yes, XC6118N16AMR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: What is the output type of XC6118N16AMR-G? A: XC6118N16AMR-G has an open-drain output type, which allows for flexibility in connecting to different microcontrollers or systems.
Q: What is the typical reset threshold voltage of XC6118N16AMR-G? A: The typical reset threshold voltage of XC6118N16AMR-G is 1.6V.
Q: Does XC6118N16AMR-G have a built-in delay time for the reset signal? A: Yes, XC6118N16AMR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.
Q: Can XC6118N16AMR-G be used in automotive applications? A: Yes, XC6118N16AMR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: What is the package type of XC6118N16AMR-G? A: XC6118N16AMR-G is available in a SOT-23-5 package, which is compact and widely used in various electronic devices.
Q: Are there any additional features or protections provided by XC6118N16AMR-G? A: Yes, XC6118N16AMR-G includes features like hysteresis, reverse current protection, and thermal shutdown to enhance system reliability and protection against abnormal conditions.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118N16AMR-G.