Torex Semiconductor Ltd
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
XC6108N48CGR-G
Pogledaj detalje Podatkovne tablice

XC6108N48CGR-G

Product Overview

Category

XC6108N48CGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation: XC6108N48CGR-G provides a stable output voltage.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
  • Low quiescent current: It consumes minimal power when in standby mode.
  • Overcurrent protection: It safeguards the circuit by limiting the current flow.
  • Thermal shutdown protection: It prevents overheating by shutting down the regulator in case of excessive temperature.

Package

XC6108N48CGR-G is available in a compact surface-mount package.

Essence

The essence of XC6108N48CGR-G lies in its ability to maintain a constant voltage supply, ensuring the proper functioning of electronic devices.

Packaging/Quantity

XC6108N48CGR-G is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 4.8V
  • Output current: Up to 150mA
  • Dropout voltage: 200mV (typical)
  • Quiescent current: 30µA (typical)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6108N48CGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  1. Voltage Regulation: XC6108N48CGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  2. Low Dropout Voltage: It can operate efficiently even when the input voltage is close to the output voltage, minimizing power loss.
  3. Overcurrent Protection: The regulator limits the current flow to protect the circuit from damage.
  4. Thermal Shutdown Protection: It shuts down the regulator if the temperature exceeds a safe threshold, preventing overheating.

Advantages and Disadvantages

Advantages

  • Stable output voltage ensures reliable operation of electronic components.
  • Low dropout voltage minimizes power dissipation.
  • Overcurrent protection safeguards the circuit from damage.
  • Thermal shutdown protection prevents overheating.

Disadvantages

  • Limited output current capacity (up to 150mA).
  • Requires an input voltage within the specified range (2.5V - 6.0V).

Working Principles

XC6108N48CGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. By continuously monitoring and regulating the voltage, it ensures stable power supply to connected devices.

Detailed Application Field Plans

XC6108N48CGR-G finds applications in various electronic systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108N48CGR-G are: - XC6206P332MR-G - LM1117IMPX-5.0/NOPB - MCP1700T-3302E/TT

These models offer similar functionality and specifications, providing options for different design requirements.

Word count: 408 words

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu XC6108N48CGR-G u tehničkim rješenjima

Sure! Here are 10 common questions and answers related to the application of XC6108N48CGR-G in technical solutions:

  1. Q: What is XC6108N48CGR-G? A: XC6108N48CGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.

  2. Q: What is the operating voltage range of XC6108N48CGR-G? A: The operating voltage range of XC6108N48CGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108N48CGR-G work? A: XC6108N48CGR-G monitors the input voltage and provides a reset signal when the voltage drops below a certain threshold, ensuring proper operation of the device.

  4. Q: What is the output type of XC6108N48CGR-G? A: XC6108N48CGR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor.

  5. Q: What is the typical quiescent current of XC6108N48CGR-G? A: The typical quiescent current of XC6108N48CGR-G is around 1.0µA, making it suitable for low-power applications.

  6. Q: Can XC6108N48CGR-G be used for overvoltage protection? A: No, XC6108N48CGR-G is specifically designed for undervoltage detection and does not provide overvoltage protection.

  7. Q: What is the temperature range of XC6108N48CGR-G? A: XC6108N48CGR-G has an operating temperature range of -40°C to +85°C, making it suitable for a wide range of environments.

  8. Q: Can XC6108N48CGR-G be used in automotive applications? A: Yes, XC6108N48CGR-G is automotive-grade and can be used in various automotive applications that require undervoltage detection.

  9. Q: What is the package type of XC6108N48CGR-G? A: XC6108N48CGR-G comes in a compact SOT-25 package, which is small and easy to integrate into PCB designs.

  10. Q: Are there any application notes or reference designs available for XC6108N48CGR-G? A: Yes, the manufacturer provides application notes and reference designs that can help with the implementation of XC6108N48CGR-G in different technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of XC6108N48CGR-G.