XC6108C48BGR-G belongs to the category of integrated circuits (ICs).
It is commonly used as a voltage detector in various electronic devices.
XC6108C48BGR-G is packaged in a SOT-23-5 package. It is available in reels with a quantity of 3000 units per reel.
The XC6108C48BGR-G has five pins arranged as follows:
```
| | --| |-- |____| ```
Pin 1: VDD - Supply voltage input
Pin 2: GND - Ground
Pin 3: VOUT - Output voltage
Pin 4: CE - Chip enable
Pin 5: NRST - Reset output
The XC6108C48BGR-G operates based on a voltage comparison principle. When the input voltage exceeds the set detection voltage, the output pin is pulled low. Conversely, when the input voltage falls below the detection voltage, the output pin remains high impedance.
The XC6108C48BGR-G can be used in various applications, including but not limited to:
These alternative models provide options for different packaging quantities to suit various production requirements.
In conclusion, the XC6108C48BGR-G is an integrated circuit voltage detector with a wide detection range, low power consumption, and high accuracy. It finds applications in battery-powered devices, power management systems, and consumer electronics. While it has limited detection voltage options, it offers reliable voltage monitoring with built-in delay circuitry. Alternative models are available with different packaging quantities to accommodate diverse production needs.
Sure! Here are 10 common questions and answers related to the application of XC6108C48BGR-G in technical solutions:
Q: What is XC6108C48BGR-G? A: XC6108C48BGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.
Q: What is the operating voltage range of XC6108C48BGR-G? A: The operating voltage range of XC6108C48BGR-G is typically between 0.9V and 6.0V.
Q: How does XC6108C48BGR-G work? A: XC6108C48BGR-G continuously monitors the input voltage and provides a reset signal when the voltage falls below a certain threshold.
Q: What is the typical reset threshold voltage of XC6108C48BGR-G? A: The typical reset threshold voltage of XC6108C48BGR-G is 4.8V.
Q: Can XC6108C48BGR-G be used in battery-powered applications? A: Yes, XC6108C48BGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: Does XC6108C48BGR-G have any built-in delay time? A: Yes, XC6108C48BGR-G has a built-in delay time of typically 200ms to prevent false resets during voltage fluctuations.
Q: Is XC6108C48BGR-G suitable for automotive applications? A: Yes, XC6108C48BGR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q: Can XC6108C48BGR-G be used in industrial control systems? A: Yes, XC6108C48BGR-G can be used in industrial control systems as it operates reliably in a wide temperature range of -40°C to +105°C.
Q: Does XC6108C48BGR-G have any built-in protection features? A: Yes, XC6108C48BGR-G has built-in overcurrent protection and thermal shutdown features to ensure safe operation.
Q: What is the package type of XC6108C48BGR-G? A: XC6108C48BGR-G is available in a compact SOT-25 package, which is suitable for space-constrained applications.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.