Pogledajte specifikacije za pojedinosti o proizvodu.
UCC38085PWRG4
Product Overview
Category
UCC38085PWRG4 belongs to the category of integrated circuits (ICs) and specifically falls under the power management ICs.
Use
This product is primarily used for controlling and regulating power in various electronic devices and systems.
Characteristics
- UCC38085PWRG4 is a highly efficient and versatile power management IC.
- It offers excellent performance in terms of voltage regulation, current sensing, and protection features.
- The IC operates at a wide input voltage range, making it suitable for diverse applications.
- It incorporates advanced control algorithms to optimize power conversion efficiency.
- UCC38085PWRG4 is designed to provide reliable and stable power supply solutions.
Package
The UCC38085PWRG4 comes in a small-sized surface mount package, commonly known as TSSOP-14.
Essence
The essence of UCC38085PWRG4 lies in its ability to efficiently manage power by regulating voltage levels and providing necessary protections.
Packaging/Quantity
The UCC38085PWRG4 is typically packaged in reels or tubes, with each reel/tube containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer's specifications.
Specifications
- Input Voltage Range: 8V to 18V
- Output Voltage Range: 0.8V to 12V
- Maximum Output Current: 1A
- Operating Temperature Range: -40°C to +125°C
- Switching Frequency: 100kHz to 1MHz
- Control Method: Current Mode PWM
Detailed Pin Configuration
The UCC38085PWRG4 has a total of 14 pins, each serving a specific function. Here is the detailed pin configuration:
- VREF: Reference voltage output
- COMP: Error amplifier output
- FB: Feedback input for voltage regulation
- CS: Current sense input
- RT/CT: Timing resistor/capacitor connection
- SS/TR: Soft-start and tracking control
- GND: Ground reference
- VCC: Power supply input
- OUT: Power switch output
- SYNC: Synchronization input
- EN/UVLO: Enable and undervoltage lockout control
- PGND: Power ground reference
- NC: No connection
- NC: No connection
Functional Features
- Voltage Regulation: UCC38085PWRG4 ensures stable and accurate voltage regulation, maintaining a constant output voltage even under varying load conditions.
- Current Sensing: The IC incorporates current sensing mechanisms to monitor and control the output current, preventing overloading or short circuits.
- Protection Features: UCC38085PWRG4 offers comprehensive protection features such as overvoltage protection (OVP), undervoltage lockout (UVLO), and thermal shutdown to safeguard the system from potential damage.
- Soft-Start: The soft-start feature allows for gradual power-up, reducing inrush currents and minimizing stress on components during startup.
Advantages and Disadvantages
Advantages
- High efficiency power management solution
- Wide input voltage range for versatile applications
- Excellent voltage regulation and current sensing capabilities
- Comprehensive protection features ensure system reliability
- Compact package size for space-constrained designs
Disadvantages
- Limited maximum output current of 1A may not be suitable for high-power applications
- Requires external timing components for operation
Working Principles
UCC38085PWRG4 operates based on the current mode PWM control method. It utilizes an internal error amplifier to compare the feedback voltage with the reference voltage and generates an error signal. This error signal is then processed by the control circuitry to adjust the duty cycle of the power switch, regulating the output voltage. The IC continuously monitors the current sense input to ensure safe operation and provides necessary protections in case of fault conditions.
Detailed Application Field Plans
UCC38085PWRG4 finds applications in various fields where efficient power management is crucial. Some of the detailed application field plans include:
- Power Supplies: The IC can be used in AC-DC converters, DC-DC converters, and other power supply designs to regulate voltage and provide necessary protections.
- Industrial Automation: UCC38085PWRG4 is suitable for controlling power in industrial automation systems, motor drives, and robotics.
- Automotive Electronics: It can be employed in automotive applications such as electric vehicle charging systems, LED lighting, and battery management systems.
- Consumer Electronics: The IC can be utilized in consumer electronic devices like smartphones, tablets, and laptops to optimize power efficiency and enhance battery life.
Detailed and Complete Alternative Models
- UCC38083PWRG4: Similar to UCC38085PWRG4,
Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu UCC38085PWRG4 u tehničkim rješenjima
Sure! Here are 10 common questions and answers related to the application of UCC38085PWRG4 in technical solutions:
Q: What is UCC38085PWRG4? A: UCC38085PWRG4 is a pulse width modulation (PWM) controller IC used for controlling power converters in various applications.
Q: What are the key features of UCC38085PWRG4? A: Some key features of UCC38085PWRG4 include integrated high-voltage startup, cycle-by-cycle current limiting, adjustable frequency, and soft-start capability.
Q: What is the operating voltage range of UCC38085PWRG4? A: UCC38085PWRG4 operates within a wide input voltage range of 9V to 20V.
Q: Can UCC38085PWRG4 be used in both buck and boost converter topologies? A: Yes, UCC38085PWRG4 can be used in both buck and boost converter topologies, making it versatile for different applications.
Q: How does UCC38085PWRG4 provide protection against overcurrent conditions? A: UCC38085PWRG4 offers cycle-by-cycle current limiting, which helps protect the system against overcurrent conditions.
Q: Does UCC38085PWRG4 have built-in protection against overvoltage events? A: No, UCC38085PWRG4 does not have built-in overvoltage protection. Additional external circuitry may be required for overvoltage protection.
Q: Can UCC38085PWRG4 operate at high switching frequencies? A: Yes, UCC38085PWRG4 can operate at high switching frequencies, typically up to 1 MHz.
Q: What is the maximum duty cycle that UCC38085PWRG4 can achieve? A: UCC38085PWRG4 can achieve a maximum duty cycle of 100%.
Q: Is UCC38085PWRG4 suitable for low-power applications? A: UCC38085PWRG4 is more commonly used in medium to high-power applications due to its features and capabilities.
Q: Are there any evaluation boards or reference designs available for UCC38085PWRG4? A: Yes, Texas Instruments provides evaluation boards and reference designs for UCC38085PWRG4, which can help users quickly prototype their applications.
Please note that these answers are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.