Texas Instruments
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
TPIC46L02DB
Pogledaj detalje Podatkovne tablice

TPIC46L02DB

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High voltage, high current, low power dissipation
  • Package: DIP (Dual In-line Package)
  • Essence: Power driver IC for automotive applications
  • Packaging/Quantity: Tape and reel packaging, 2500 units per reel

Specifications

  • Voltage Range: 4.5V to 5.5V
  • Output Current: Up to 1.5A
  • Operating Temperature: -40°C to +125°C
  • Input Logic Compatibility: CMOS/TTL
  • Output Type: Low-side
  • Number of Outputs: 6
  • Protection Features: Overtemperature, overvoltage, undervoltage, and short-circuit protection

Detailed Pin Configuration

The TPIC46L02DB has a total of 20 pins arranged as follows:

  1. VCC
  2. OUT1
  3. OUT2
  4. OUT3
  5. OUT4
  6. OUT5
  7. OUT6
  8. GND
  9. IN1
  10. IN2
  11. IN3
  12. IN4
  13. IN5
  14. IN6
  15. EN1
  16. EN2
  17. EN3
  18. EN4
  19. EN5
  20. EN6

Functional Features

  • High voltage and current capability for driving various loads
  • Low power dissipation for improved efficiency
  • Built-in protection features for enhanced reliability
  • Compatible with CMOS and TTL logic levels
  • Multiple outputs for driving multiple loads simultaneously

Advantages and Disadvantages

Advantages: - High voltage and current capability make it suitable for automotive applications - Low power dissipation helps in reducing energy consumption - Built-in protection features ensure safe operation - Multiple outputs allow for versatile load driving

Disadvantages: - Limited number of outputs may not be sufficient for complex systems requiring more than 6 loads - DIP package may not be suitable for space-constrained applications

Working Principles

The TPIC46L02DB is a power driver IC designed to control and drive various loads in automotive applications. It operates by receiving input signals from a microcontroller or other control circuitry and amplifying them to provide high voltage and current outputs. The IC incorporates protection features such as overtemperature, overvoltage, undervoltage, and short-circuit protection to ensure safe operation.

Detailed Application Field Plans

The TPIC46L02DB is commonly used in the following automotive applications:

  1. Automotive lighting systems: It can drive multiple high-power LEDs or incandescent bulbs for headlights, taillights, and interior lighting.
  2. Motor control: It can be used to drive motors for windshield wipers, power windows, and HVAC systems.
  3. Power distribution: It can control relays or solenoids for various functions like door locks, fuel pumps, and power seats.

Detailed and Complete Alternative Models

  1. TPIC46L03DB: Similar to TPIC46L02DB but with 8 outputs instead of 6.
  2. TPIC46L04DB: Similar to TPIC46L02DB but with higher output current capability.
  3. TPIC46L05DB: Similar to TPIC46L02DB but with additional protection features.

These alternative models offer different features and specifications to cater to specific application requirements.

Word count: 364 words

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu TPIC46L02DB u tehničkim rješenjima

Sure! Here are 10 common questions and answers related to the application of TPIC46L02DB in technical solutions:

  1. Q: What is TPIC46L02DB? A: TPIC46L02DB is a high-voltage, high-current power logic shift register designed for automotive applications.

  2. Q: What are the key features of TPIC46L02DB? A: The key features include 8-bit shift register, serial input/output, latch enable, and high-voltage outputs.

  3. Q: What is the voltage range supported by TPIC46L02DB? A: TPIC46L02DB supports a wide voltage range from 4.5V to 40V.

  4. Q: Can TPIC46L02DB handle high currents? A: Yes, TPIC46L02DB can handle high currents up to 500mA per output.

  5. Q: What is the purpose of the latch enable pin in TPIC46L02DB? A: The latch enable pin allows the outputs to be latched or transparently passed through.

  6. Q: How many outputs does TPIC46L02DB have? A: TPIC46L02DB has 8 high-voltage outputs.

  7. Q: Is TPIC46L02DB suitable for automotive applications? A: Yes, TPIC46L02DB is specifically designed for automotive applications and can withstand harsh environments.

  8. Q: Can TPIC46L02DB be cascaded to increase the number of outputs? A: Yes, multiple TPIC46L02DB devices can be cascaded to increase the number of outputs.

  9. Q: Does TPIC46L02DB have built-in protection features? A: Yes, TPIC46L02DB has built-in protection features such as thermal shutdown and overvoltage protection.

  10. Q: What are some typical applications of TPIC46L02DB? A: TPIC46L02DB is commonly used in automotive lighting systems, motor control, and other high-voltage applications.

Please note that these answers are general and may vary depending on the specific requirements and use cases.