Texas Instruments
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
TLE2062AIDR
Pogledaj detalje Podatkovne tablice

TLE2062AIDR

Product Overview

The TLE2062AIDR is a dual operational amplifier belonging to the category of integrated circuits. It is commonly used in audio applications, precision instrumentation, and control systems due to its high-performance characteristics. The TLE2062AIDR comes in a small outline package (SOIC) and is available in tape and reel packaging with a quantity of 2500 units per reel.

Specifications

  • Supply Voltage: ±2V to ±18V
  • Input Offset Voltage: 150μV maximum
  • Input Bias Current: 0.1pA typical
  • Slew Rate: 7V/μs typical
  • Gain Bandwidth Product: 8MHz typical
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The TLE2062AIDR has a standard 8-pin SOIC package with the following pin configuration: 1. Non-inverting input (A) 2. Inverting input (A) 3. Negative power supply (A) 4. Ground (A) 5. Ground (B) 6. Negative power supply (B) 7. Inverting input (B) 8. Non-inverting input (B)

Functional Features

The TLE2062AIDR offers low noise, high slew rate, and wide bandwidth, making it suitable for high-fidelity audio applications. It also provides low input bias current and low offset voltage, ensuring precision in instrumentation and control systems.

Advantages and Disadvantages

Advantages

  • High performance in audio applications
  • Precision instrumentation capabilities
  • Low noise and low input bias current

Disadvantages

  • Limited operating voltage range compared to some alternatives
  • Higher cost compared to lower-performance op-amps

Working Principles

The TLE2062AIDR operates based on the principles of differential amplification, providing high gain and accurate signal processing. Its internal circuitry is designed to minimize noise and distortion, resulting in clean and precise output signals.

Detailed Application Field Plans

The TLE2062AIDR is well-suited for the following applications: - Audio preamplifiers and amplifiers - Signal conditioning in precision measurement instruments - Control systems requiring high accuracy and stability

Detailed and Complete Alternative Models

Some alternative models to the TLE2062AIDR include: - LM4562 - OPA2134 - NE5532

These alternatives offer similar performance characteristics and can be considered based on specific application requirements.

In conclusion, the TLE2062AIDR is a versatile dual operational amplifier that excels in audio, instrumentation, and control applications, offering high performance and precision in a compact package.

Word count: 366

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu TLE2062AIDR u tehničkim rješenjima

  1. What is the TLE2062AIDR?

    • The TLE2062AIDR is a high-performance, low-noise operational amplifier designed for precision analog applications.

  2. What are the key features of the TLE2062AIDR?

    • The TLE2062AIDR features low offset voltage, low input bias current, and low noise, making it suitable for precision signal conditioning and amplification.

  3. What is the typical supply voltage range for the TLE2062AIDR?

    • The TLE2062AIDR typically operates from a supply voltage range of ±2.5V to ±18V, making it versatile for various power supply configurations.

  4. In what applications can the TLE2062AIDR be used?

    • The TLE2062AIDR is commonly used in instrumentation amplifiers, data acquisition systems, audio processing equipment, and other precision analog circuits.

  5. What is the input offset voltage of the TLE2062AIDR?

    • The TLE2062AIDR has a low input offset voltage of typically 150µV, which is beneficial for precision applications requiring accurate signal amplification.

  6. Does the TLE2062AIDR have thermal shutdown protection?

    • No, the TLE2062AIDR does not have built-in thermal shutdown protection, so external thermal management may be required in high-temperature environments.

  7. What is the recommended operating temperature range for the TLE2062AIDR?

    • The TLE2062AIDR is typically specified to operate within the temperature range of -40°C to 125°C, suitable for a wide range of industrial and automotive applications.

  8. Can the TLE2062AIDR be used in single-supply applications?

    • Yes, the TLE2062AIDR can be used in single-supply applications with proper biasing and voltage level considerations.

  9. What is the unity-gain bandwidth of the TLE2062AIDR?

    • The TLE2062AIDR has a unity-gain bandwidth of typically 10 MHz, allowing for high-frequency signal amplification in various applications.

  10. Is the TLE2062AIDR available in surface-mount packages?

    • Yes, the TLE2062AIDR is available in surface-mount packages, such as SOIC and VSSOP, providing flexibility for compact circuit designs and PCB layouts.