Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
SN74LVC1G74DCUT

SN74LVC1G74DCUT

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Flip-Flop
  • Characteristics: Single D-Type Positive-Edge-Triggered Flip-Flop
  • Package: SOT-23-5
  • Essence: This IC is a single positive-edge-triggered D-type flip-flop with clear and preset inputs.
  • Packaging/Quantity: Cut Tape, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • High-Level Input Voltage: 2V to VCC + 0.5V
  • Low-Level Input Voltage: -0.5V to 0.8V
  • High-Level Output Voltage: VCC - 0.4V
  • Low-Level Output Voltage: 0.4V
  • Maximum Clock Frequency: 100MHz
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The SN74LVC1G74DCUT has the following pin configuration:

____ CLR --| |-- VCC D --| |-- Q CLK --| |-- GND PRE --| |-- /Q ----

Functional Features

  • Positive-edge-triggered D-type flip-flop operation
  • Clear (CLR) and preset (PRE) inputs for asynchronous control
  • Schmitt-triggered clock input (CLK)
  • Complementary outputs (Q and /Q)

Advantages and Disadvantages

Advantages: - Small package size allows for space-efficient designs - Wide supply voltage range enables compatibility with various systems - Schmitt-triggered clock input ensures reliable operation in noisy environments

Disadvantages: - Limited maximum clock frequency compared to some other flip-flop ICs - Only one flip-flop in a single package, limiting the number of flip-flops per IC

Working Principles

The SN74LVC1G74DCUT is a positive-edge-triggered D-type flip-flop. It stores and outputs data based on the rising edge of the clock signal (CLK). The clear (CLR) and preset (PRE) inputs allow for asynchronous control over the flip-flop's state. The Schmitt-triggered clock input ensures reliable operation even in the presence of noise.

Detailed Application Field Plans

The SN74LVC1G74DCUT can be used in various applications, including but not limited to: - Digital logic circuits - Data storage systems - Communication devices - Microcontrollers - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that serve similar functions to the SN74LVC1G74DCUT include: - SN74LVC1G74DCKR - SN74LVC1G74DBVR - SN74LVC1G74DRLR - SN74LVC1G74DRYR

These alternatives offer similar features and specifications, allowing designers to choose the most suitable option for their specific requirements.

Word count: 314 words

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu SN74LVC1G74DCUT u tehničkim rješenjima

Sure! Here are 10 common questions and answers related to the application of SN74LVC1G74DCUT in technical solutions:

Q1: What is SN74LVC1G74DCUT? A1: SN74LVC1G74DCUT is a single positive-edge-triggered D-type flip-flop with clear, designed for 1.65-V to 5.5-V VCC operation.

Q2: What is the purpose of SN74LVC1G74DCUT? A2: SN74LVC1G74DCUT is used to store and transfer data in digital circuits. It can be used in various applications such as counters, registers, and memory elements.

Q3: What is the operating voltage range of SN74LVC1G74DCUT? A3: SN74LVC1G74DCUT operates within a voltage range of 1.65V to 5.5V.

Q4: How many inputs and outputs does SN74LVC1G74DCUT have? A4: SN74LVC1G74DCUT has one data input (D), one clock input (CLK), one clear input (CLR), and two outputs (Q and Q̅).

Q5: What is the maximum clock frequency supported by SN74LVC1G74DCUT? A5: SN74LVC1G74DCUT supports a maximum clock frequency of 100 MHz.

Q6: Can SN74LVC1G74DCUT operate in both rising and falling edge-triggered modes? A6: No, SN74LVC1G74DCUT is only positive-edge-triggered, meaning it responds to changes on the CLK input when transitioning from low to high.

Q7: What is the power supply current consumption of SN74LVC1G74DCUT? A7: The power supply current consumption of SN74LVC1G74DCUT is typically 2.5 mA.

Q8: Does SN74LVC1G74DCUT have any built-in protection features? A8: Yes, SN74LVC1G74DCUT has built-in protection against electrostatic discharge (ESD) and excessive power dissipation.

Q9: Can SN74LVC1G74DCUT be used in battery-powered applications? A9: Yes, SN74LVC1G74DCUT can be used in battery-powered applications as it operates within a wide voltage range and has low power consumption.

Q10: What is the package type of SN74LVC1G74DCUT? A10: SN74LVC1G74DCUT is available in a small SOT-23-5 package, which is compact and suitable for space-constrained designs.

Please note that these answers are general and may vary depending on the specific application and requirements.