SN74ALVC126NSR

Product Overview

Category: Integrated Circuit (IC)
Use: Buffer/Driver
Characteristics: High-speed, low-voltage, non-inverting
Package: 14-pin small-outline integrated circuit (SOIC)
Essence: Logic gate with four independent buffer/driver channels
Packaging/Quantity: Tape and reel packaging, 2500 units per reel

Specifications

Supply Voltage Range: 1.65V to 3.6V
Input Voltage Range: 0V to VCC
Output Voltage Range: 0V to VCC
Maximum Operating Frequency: 400MHz
Output Drive Capability: ±24mA
Propagation Delay: 2.5ns (typical)

Detailed Pin Configuration

The SN74ALVC126NSR has a 14-pin SOIC package with the following pin configuration:

__ __ Y1 |1 \/ 14| VCC A1 |2 13| B1 A2 |3 12| Y2 B2 |4 11| A3 Y3 |5 10| B3 GND |6 9| Y4 B4 |7 8| A4 -- --

Functional Features

Non-inverting buffer/driver with 3-state outputs
Independent control of each channel
High-speed operation suitable for various applications
Low power consumption
Compatible with TTL input/output levels
Supports mixed-mode signal operation

Advantages and Disadvantages

Advantages: - High-speed operation allows for efficient data transfer - Low-voltage operation reduces power consumption - 3-state outputs provide flexibility in bus systems - Compatibility with TTL levels simplifies integration

Disadvantages: - Limited output drive capability compared to some other ICs - Not suitable for high-voltage applications

Working Principles

The SN74ALVC126NSR is a buffer/driver IC that amplifies and controls digital signals. It operates by receiving input signals (A1-A4) and driving the corresponding output signals (Y1-Y4). The 3-state outputs allow the device to be effectively disconnected from the bus when not in use, preventing signal interference.

Detailed Application Field Plans

The SN74ALVC126NSR is commonly used in various applications, including:

Data communication systems: It can be used to amplify and control signals in data transmission lines, ensuring reliable and efficient communication.
Microprocessor interfacing: The IC facilitates the connection between microprocessors and peripheral devices, enabling seamless data transfer.
Memory systems: It can be utilized in memory modules to enhance signal integrity and improve overall system performance.
Industrial automation: The IC finds application in industrial control systems, providing signal buffering and driving capabilities.

Detailed and Complete Alternative Models

SN74LVC126A: Similar to SN74ALVC126NSR but operates at a lower voltage range of 1.65V to 3.3V.
SN74HC126: A higher-speed alternative with a wider supply voltage range of 2V to 6V.
SN74LVTH126: Offers increased output drive capability and operates at a voltage range of 2.7V to 3.6V.

These alternative models provide options based on specific requirements such as voltage range, speed, and output drive capability.

In conclusion, the SN74ALVC126NSR is a versatile buffer/driver IC that offers high-speed operation, low-voltage compatibility, and 3-state outputs. Its compact package and wide range of applications make it a popular choice in various electronic systems.

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu SN74ALVC126NSR u tehničkim rješenjima

Sure! Here are 10 common questions and answers related to the application of SN74ALVC126NSR:

Q: What is SN74ALVC126NSR? A: SN74ALVC126NSR is a quad buffer/line driver IC (integrated circuit) that can be used in various technical solutions.
Q: What is the purpose of SN74ALVC126NSR? A: SN74ALVC126NSR is designed to provide buffering and line driving capabilities, allowing signals to be transmitted between different parts of a circuit or system.
Q: What voltage levels does SN74ALVC126NSR support? A: SN74ALVC126NSR supports voltage levels ranging from 1.65V to 3.6V, making it compatible with a wide range of digital systems.
Q: How many buffers/drivers are there in SN74ALVC126NSR? A: SN74ALVC126NSR contains four independent buffers/drivers, each capable of driving one signal line.
Q: Can SN74ALVC126NSR handle bidirectional signals? A: No, SN74ALVC126NSR is unidirectional and can only drive signals in one direction.
Q: What is the maximum output current of SN74ALVC126NSR? A: SN74ALVC126NSR can source/sink up to 24mA of current per output, ensuring reliable signal transmission.
Q: Is SN74ALVC126NSR suitable for high-speed applications? A: Yes, SN74ALVC126NSR has a fast propagation delay and is suitable for high-speed data transmission.
Q: Can SN74ALVC126NSR tolerate overvoltage conditions? A: SN74ALVC126NSR has built-in protection features that allow it to tolerate limited overvoltage conditions, but it is always recommended to stay within the specified voltage range.
Q: Can I use SN74ALVC126NSR in a mixed-voltage system? A: Yes, SN74ALVC126NSR is designed to be compatible with mixed-voltage systems, allowing for seamless integration.
Q: What package options are available for SN74ALVC126NSR? A: SN74ALVC126NSR is available in various package options, such as SOIC (Small Outline Integrated Circuit) and TSSOP (Thin Shrink Small Outline Package), providing flexibility for different PCB layouts.

Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult the manufacturer for detailed information.