Pogledajte specifikacije za pojedinosti o proizvodu.
SN65LVDS3486BDRG4
Product Overview
Category
SN65LVDS3486BDRG4 belongs to the category of integrated circuits (ICs).
Use
This product is commonly used in high-speed data transmission applications.
Characteristics
- High-speed LVDS (Low Voltage Differential Signaling) driver/receiver
- Supports data rates up to 400 Mbps
- Low power consumption
- Wide operating voltage range
- Robust noise immunity
- Small form factor
Package
SN65LVDS3486BDRG4 is available in a small outline package (SOIC) with 16 pins.
Essence
The essence of SN65LVDS3486BDRG4 lies in its ability to transmit and receive high-speed data signals reliably and efficiently.
Packaging/Quantity
This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
Specifications
- Supply voltage: 3.3V
- Operating temperature range: -40°C to +85°C
- Input/output voltage range: -0.3V to 4V
- Output current: ±3.5mA
- Propagation delay: 1.8ns (typical)
- Rise/fall time: 500ps (typical)
Detailed Pin Configuration
- VCC
- GND
- AOUT1
- AOUT2
- AOUT3
- AOUT4
- BOUT1
- BOUT2
- BOUT3
- BOUT4
- AIN1
- AIN2
- AIN3
- AIN4
- BIN1
- BIN2
Functional Features
- High-speed differential signaling
- Balanced output voltage levels
- Low power consumption
- ESD protection
- Built-in termination resistors
Advantages and Disadvantages
Advantages
- High-speed data transmission
- Robust noise immunity
- Wide operating voltage range
- Small form factor
- Low power consumption
Disadvantages
- Limited number of input/output channels
- Requires LVDS-compatible devices for proper operation
Working Principles
SN65LVDS3486BDRG4 operates based on the principles of LVDS, a signaling technology that uses differential voltages to transmit data. It converts parallel data into serial data streams and vice versa, allowing for high-speed and noise-resistant communication between devices.
Detailed Application Field Plans
SN65LVDS3486BDRG4 finds applications in various fields, including:
- Automotive: Used in automotive infotainment systems, camera interfaces, and driver assistance systems.
- Industrial: Employed in industrial automation, control systems, and high-speed data acquisition.
- Consumer Electronics: Integrated into high-definition displays, gaming consoles, and multimedia devices.
- Telecommunications: Utilized in high-speed data communication networks and telecommunication equipment.
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to SN65LVDS3486BDRG4 are:
- SN65LVDS3487BDRG4
- SN65LVDS3488BDRG4
- SN65LVDS3489BDRG4
- SN65LVDS3490BDRG4
These models have comparable specifications and can be used as alternatives depending on specific requirements.
Word count: 511 words
Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu SN65LVDS3486BDRG4 u tehničkim rješenjima
Sure! Here are 10 common questions and answers related to the application of SN65LVDS3486BDRG4 in technical solutions:
Q: What is SN65LVDS3486BDRG4? A: SN65LVDS3486BDRG4 is a quad differential line receiver designed for high-speed data transmission over long distances using LVDS (Low Voltage Differential Signaling) technology.
Q: What is the maximum data rate supported by SN65LVDS3486BDRG4? A: SN65LVDS3486BDRG4 supports data rates up to 400 Mbps, making it suitable for high-speed applications.
Q: Can SN65LVDS3486BDRG4 be used for point-to-point communication? A: Yes, SN65LVDS3486BDRG4 can be used for point-to-point communication between two devices or systems.
Q: What is the operating voltage range of SN65LVDS3486BDRG4? A: SN65LVDS3486BDRG4 operates from a supply voltage range of 3V to 3.6V.
Q: Does SN65LVDS3486BDRG4 support hot-plugging capability? A: No, SN65LVDS3486BDRG4 does not support hot-plugging. It is recommended to power down the device before connecting or disconnecting any cables.
Q: Can SN65LVDS3486BDRG4 be used in industrial environments? A: Yes, SN65LVDS3486BDRG4 is designed to operate in industrial temperature ranges (-40°C to +85°C) and is suitable for use in harsh environments.
Q: How many differential inputs does SN65LVDS3486BDRG4 have? A: SN65LVDS3486BDRG4 has four differential inputs, allowing it to receive data from multiple sources.
Q: What is the common-mode voltage range of SN65LVDS3486BDRG4? A: The common-mode voltage range of SN65LVDS3486BDRG4 is typically -1V to +2V.
Q: Can SN65LVDS3486BDRG4 be used for long-distance communication? A: Yes, SN65LVDS3486BDRG4 is specifically designed for long-distance data transmission, making it suitable for applications requiring signal integrity over extended cable lengths.
Q: Does SN65LVDS3486BDRG4 require external termination resistors? A: Yes, SN65LVDS3486BDRG4 requires external termination resistors to match the characteristic impedance of the transmission line and minimize reflections.
Please note that these answers are general and may vary depending on specific application requirements. It is always recommended to refer to the device datasheet and consult with an engineer for detailed information.