Texas Instruments
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
MAX213CDBR
Pogledaj detalje Podatkovne tablice

MAX213CDBR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Communication and Networking
  • Characteristics: Low-power, RS-232 Transceiver
  • Package: 14-pin SOIC (Small Outline Integrated Circuit)
  • Essence: MAX213CDBR is a low-power, RS-232 transceiver IC designed for communication and networking applications.
  • Packaging/Quantity: Available in tape and reel packaging with 2500 units per reel.

Specifications

  • Supply Voltage: 3.0V to 5.5V
  • Data Rate: Up to 120kbps
  • Number of Channels: 2
  • Operating Temperature Range: -40°C to +85°C
  • ESD Protection: ±15kV Human Body Model
  • RoHS Compliant: Yes

Pin Configuration

The MAX213CDBR has a total of 14 pins. The pin configuration is as follows:

  1. VCC
  2. GND
  3. T1OUT
  4. R1IN
  5. R1OUT
  6. T1IN
  7. SHDN
  8. C1-
  9. C1+
  10. V+
  11. V-
  12. R2OUT
  13. T2IN
  14. R2IN

Functional Features

  • Low-power operation for energy-efficient applications.
  • RS-232 compatibility for easy integration into existing systems.
  • Two independent channels for simultaneous bidirectional communication.
  • Built-in shutdown mode for power-saving when not in use.
  • ESD protection for enhanced reliability.

Advantages and Disadvantages

Advantages

  • Low power consumption extends battery life in portable devices.
  • Wide operating voltage range allows flexibility in various applications.
  • High data rate enables fast and efficient communication.
  • Compact package size saves board space.
  • ESD protection ensures robustness against electrostatic discharge.

Disadvantages

  • Limited to RS-232 communication protocol, may not be suitable for other standards.
  • Requires external components for complete functionality.
  • Not suitable for high-speed data transmission applications.

Working Principles

The MAX213CDBR is designed to interface between low-voltage logic signals and RS-232 voltage levels. It uses internal charge pumps to generate the required RS-232 voltage levels from a single power supply. The transceiver converts the logic-level signals into RS-232 compatible signals for reliable communication over longer distances.

Detailed Application Field Plans

The MAX213CDBR is commonly used in various communication and networking applications, including:

  1. Industrial automation systems
  2. Point-of-sale terminals
  3. Data acquisition systems
  4. Embedded systems
  5. Networking equipment
  6. Medical devices
  7. Test and measurement instruments

Detailed and Complete Alternative Models

  1. MAX232: Similar functionality with a DIP package option.
  2. MAX3232: Enhanced ESD protection and higher data rate capability.
  3. MAX202: Lower power consumption and smaller package size.

These alternative models offer similar functionality to the MAX213CDBR and can be considered based on specific application requirements.

Word count: 411

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu MAX213CDBR u tehničkim rješenjima

Sure! Here are 10 common questions and answers related to the application of MAX213CDBR in technical solutions:

  1. Q: What is MAX213CDBR? A: MAX213CDBR is a dual RS-232 transceiver IC that provides two full-duplex RS-232 ports for communication between devices.

  2. Q: What is the operating voltage range of MAX213CDBR? A: The operating voltage range of MAX213CDBR is typically between +4.5V and +5.5V.

  3. Q: Can MAX213CDBR be used with both 3.3V and 5V microcontrollers? A: Yes, MAX213CDBR is compatible with both 3.3V and 5V microcontrollers as it supports TTL/CMOS logic levels.

  4. Q: How many data rates can MAX213CDBR support? A: MAX213CDBR supports data rates up to 120kbps, making it suitable for various serial communication applications.

  5. Q: Does MAX213CDBR have built-in ESD protection? A: Yes, MAX213CDBR has built-in ESD protection on all pins, ensuring robustness against electrostatic discharge events.

  6. Q: Can MAX213CDBR be used in industrial environments? A: Yes, MAX213CDBR is designed to operate reliably in industrial environments, offering enhanced noise immunity and ruggedness.

  7. Q: Is MAX213CDBR compatible with standard RS-232 voltage levels? A: Yes, MAX213CDBR is fully compliant with the RS-232 standard, supporting the required voltage levels for reliable communication.

  8. Q: Can MAX213CDBR be used for long-distance communication? A: MAX213CDBR is suitable for short to medium-range communication (up to 15 meters) without the need for additional line drivers.

  9. Q: Does MAX213CDBR require external capacitors for operation? A: Yes, MAX213CDBR requires a few external capacitors for proper operation, as specified in the datasheet.

  10. Q: Are there any application examples for MAX213CDBR? A: Yes, MAX213CDBR can be used in various applications such as industrial automation, instrumentation, point-of-sale systems, and more.

Please note that these answers are general and may vary depending on specific use cases and requirements. It's always recommended to refer to the datasheet and consult the manufacturer for detailed information.