LMV722MM

Product Overview

Category: Operational Amplifier
Use: Signal amplification and conditioning
Characteristics: Low voltage, low power consumption
Package: Miniature 8-pin MSOP package
Essence: High-performance operational amplifier
Packaging/Quantity: Available in reels of 2500 units

Specifications

Supply Voltage: 1.8V to 5.5V
Input Offset Voltage: ±1.5mV (maximum)
Gain Bandwidth Product: 10MHz
Slew Rate: 3.5V/µs
Quiescent Current: 50µA (typical)
Input Bias Current: 1pA (typical)
Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The LMV722MM has a total of 8 pins arranged as follows:

V+ (Positive Power Supply)
IN- (Inverting Input)
IN+ (Non-Inverting Input)
V- (Negative Power Supply)
OUT (Output)
NC (No Connection)
NC (No Connection)
GND (Ground)

Functional Features

Rail-to-Rail Input and Output
Low Input Offset Voltage
Low Quiescent Current
Wide Supply Voltage Range
High Open-Loop Gain
Unity-Gain Stable

Advantages and Disadvantages

Advantages: - Suitable for low-voltage applications - Low power consumption - Wide operating temperature range - Small package size for space-constrained designs

Disadvantages: - Limited output current capability - Not suitable for high-frequency applications

Working Principles

The LMV722MM is an operational amplifier designed to amplify and condition signals. It operates on a low supply voltage and consumes minimal power. The rail-to-rail input and output capability allows for maximum signal swing even with low supply voltages. The amplifier has a high open-loop gain, ensuring accurate amplification of small input signals. It is unity-gain stable, making it suitable for various applications.

Detailed Application Field Plans

The LMV722MM can be used in a wide range of applications, including but not limited to: - Portable audio devices - Battery-powered instrumentation - Sensor signal conditioning - Low-voltage analog signal processing - Industrial control systems

Detailed and Complete Alternative Models

LMV321: Single operational amplifier with similar specifications
LMV358: Dual operational amplifier with similar specifications
LMV324: Quad operational amplifier with similar specifications

These alternative models offer similar functionality and performance characteristics to the LMV722MM, providing flexibility in design choices.

Note: This entry contains 311 words.

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu LMV722MM u tehničkim rješenjima

Sure! Here are 10 common questions and answers related to the application of LMV722MM in technical solutions:

Q: What is LMV722MM? A: LMV722MM is a dual operational amplifier (op-amp) with low voltage and low power consumption, commonly used in various electronic applications.
Q: What is the supply voltage range for LMV722MM? A: The supply voltage range for LMV722MM is typically between 2.7V and 5.5V.
Q: What is the input offset voltage of LMV722MM? A: The input offset voltage of LMV722MM is typically around 1mV.
Q: Can LMV722MM operate at high frequencies? A: Yes, LMV722MM has a wide bandwidth and can operate at high frequencies, typically up to several megahertz.
Q: Is LMV722MM suitable for battery-powered applications? A: Yes, LMV722MM is designed for low power consumption, making it suitable for battery-powered applications where power efficiency is crucial.
Q: What is the input bias current of LMV722MM? A: The input bias current of LMV722MM is typically around 1nA.
Q: Can LMV722MM be used as a comparator? A: While LMV722MM is primarily an op-amp, it can be used as a comparator in certain applications with appropriate external circuitry.
Q: Does LMV722MM have built-in protection features? A: Yes, LMV722MM includes built-in protection features such as short-circuit protection and thermal shutdown.
Q: What is the output voltage swing of LMV722MM? A: The output voltage swing of LMV722MM is typically close to the supply voltage range, allowing for a wide dynamic range.
Q: Can LMV722MM be used in single-supply applications? A: Yes, LMV722MM can be used in both single-supply and dual-supply applications, providing flexibility in various circuit designs.

Please note that the specific values mentioned above are typical values and may vary depending on the manufacturer's specifications.