Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
LM139ADR

LM139ADR

Product Overview

Category: Integrated Circuits (ICs)

Use: LM139ADR is a quad voltage comparator that operates from a single power supply. It is designed to compare voltages and provide digital outputs indicating the larger voltage.

Characteristics: - Quad voltage comparator - Single power supply operation - Low input bias current - Wide range of operating voltage - High output sink current capability

Package: SOIC-14

Essence: LM139ADR is an essential component in electronic circuits where voltage comparison is required.

Packaging/Quantity: LM139ADR is available in reels with 2500 units per reel.

Specifications

  • Supply Voltage Range: 2V to 36V
  • Input Offset Voltage: ±5mV
  • Input Bias Current: ±25nA
  • Response Time: 1.3μs
  • Output Sink Current: 20mA
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

LM139ADR has a total of 14 pins arranged as follows:

```


| | --|IN1+ VCC|-- --|IN1- OUT|-- --|IN2+ IN3|-- --|IN2- GND|-- --|IN4+ NC |-- --|IN4- NC |-- |___________| ```

Functional Features

  • Quad voltage comparator allows for multiple voltage comparisons simultaneously.
  • Single power supply operation simplifies circuit design.
  • Low input bias current minimizes errors in voltage comparison.
  • Wide range of operating voltage makes it suitable for various applications.
  • High output sink current capability enables driving of external loads.

Advantages

  • Compact and versatile IC for voltage comparison applications.
  • Easy to integrate into electronic circuits.
  • Low power consumption.
  • Wide operating temperature range allows for use in extreme conditions.

Disadvantages

  • Limited number of comparators (4) in a single package.
  • Not suitable for high-frequency applications.

Working Principles

LM139ADR compares the voltages applied to its input pins and provides digital outputs based on the comparison results. The inputs are compared with an internal reference voltage, and the output switches to a logic high or low state depending on which input voltage is higher.

Detailed Application Field Plans

LM139ADR finds applications in various fields such as: 1. Battery management systems 2. Power supply monitoring 3. Motor control circuits 4. Signal conditioning 5. Threshold detection 6. Level shifting 7. Window comparators 8. Oscillators

Alternative Models

Some alternative models that can be used instead of LM139ADR include: 1. LM339ADR: Quad voltage comparator with open-drain outputs. 2. LM2901DR: Quad voltage comparator with push-pull outputs. 3. LM311N: Single voltage comparator with differential inputs.

These alternatives offer similar functionality and can be chosen based on specific requirements and availability.

In conclusion, LM139ADR is a versatile quad voltage comparator that offers precise voltage comparison in electronic circuits. Its compact size, low power consumption, and wide operating voltage range make it suitable for various applications. However, its limited number of comparators and unsuitability for high-frequency applications should be considered when selecting this IC.

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu LM139ADR u tehničkim rješenjima

Sure! Here are 10 common questions and answers related to the application of LM139ADR in technical solutions:

  1. Question: What is LM139ADR?
    Answer: LM139ADR is a quad differential comparator IC that is commonly used in various technical applications.

  2. Question: What is the operating voltage range of LM139ADR?
    Answer: The operating voltage range of LM139ADR is typically between 2V and 36V.

  3. Question: What is the input offset voltage of LM139ADR?
    Answer: The input offset voltage of LM139ADR is typically around 2mV.

  4. Question: Can LM139ADR be used for high-speed applications?
    Answer: No, LM139ADR is not suitable for high-speed applications as it has a relatively slow response time.

  5. Question: What is the output current capability of LM139ADR?
    Answer: The output current capability of LM139ADR is typically around 20mA.

  6. Question: Is LM139ADR suitable for battery-powered applications?
    Answer: Yes, LM139ADR can be used in battery-powered applications as it has a low quiescent current consumption.

  7. Question: Can LM139ADR operate in harsh environments?
    Answer: Yes, LM139ADR is designed to operate in a wide temperature range and can withstand moderate levels of shock and vibration.

  8. Question: What is the typical response time of LM139ADR?
    Answer: The typical response time of LM139ADR is around 1.3μs.

  9. Question: Can LM139ADR be used in automotive applications?
    Answer: Yes, LM139ADR is suitable for automotive applications as it meets the necessary standards for automotive electronics.

  10. Question: Are there any recommended external components for using LM139ADR?
    Answer: Yes, it is recommended to use bypass capacitors and pull-up resistors for stable operation of LM139ADR in most applications.

Please note that the answers provided are general and may vary depending on specific datasheet specifications and application requirements.