Texas Instruments
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
74ALB16244DGVRE4
Pogledaj detalje Podatkovne tablice

Encyclopedia Entry: 74ALB16244DGVRE4

Product Overview

Category

The 74ALB16244DGVRE4 belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for signal amplification and transmission.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with various logic families

Package

The 74ALB16244DGVRE4 is available in a small outline integrated circuit (SOIC) package.

Essence

This IC serves as a buffer and line driver, ensuring efficient signal transfer between different components of an electronic system.

Packaging/Quantity

The 74ALB16244DGVRE4 is typically packaged in reels containing a quantity of 250 units.

Specifications

  • Supply Voltage Range: 2.0V to 5.5V
  • Input Voltage Range: -0.5V to VCC + 0.5V
  • Output Voltage Range: -0.5V to VCC + 0.5V
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Propagation Delay: 6 ns
  • Maximum Quiescent Current: 10 μA

Detailed Pin Configuration

The 74ALB16244DGVRE4 has a total of 48 pins, which are arranged as follows:

  1. Pin 1: Output Enable (OE)
  2. Pin 2: A1
  3. Pin 3: Y1
  4. Pin 4: B1
  5. Pin 5: GND (Ground)
  6. Pin 6: Y2
  7. Pin 7: A2
  8. Pin 8: B2
  9. Pin 9: OE#
  10. Pin 10: VCC (Supply Voltage)
  11. Pin 11: B3
  12. Pin 12: Y3
  13. Pin 13: A3
  14. Pin 14: GND
  15. Pin 15: Y4
  16. Pin 16: B4
  17. Pin 17: OE#
  18. Pin 18: A4
  19. Pin 19: Y5
  20. Pin 20: B5
  21. Pin 21: GND
  22. Pin 22: Y6
  23. Pin 23: A5
  24. Pin 24: B6
  25. Pin 25: OE#
  26. Pin 26: VCC
  27. Pin 27: B7
  28. Pin 28: Y7
  29. Pin 29: A6
  30. Pin 30: GND
  31. Pin 31: Y8
  32. Pin 32: B8
  33. Pin 33: OE#
  34. Pin 34: A7
  35. Pin 35: Y9
  36. Pin 36: B9
  37. Pin 37: GND
  38. Pin 38: Y10
  39. Pin 39: A8
  40. Pin 40: B10
  41. Pin 41: OE#
  42. Pin 42: VCC
  43. Pin 43: B11
  44. Pin 44: Y11
  45. Pin 45: A9
  46. Pin 46: GND
  47. Pin 47: Y12
  48. Pin 48: B12

Functional Features

  • High-speed signal buffering and line driving capabilities
  • Bi-directional data flow
  • Output enable control for flexible operation
  • Wide operating voltage range allows compatibility with various systems

Advantages and Disadvantages

Advantages

  • High-speed operation enables efficient data transfer
  • Low power consumption for energy-efficient designs
  • Wide operating voltage range ensures compatibility with different systems
  • Bi-directional data flow simplifies circuit design

Disadvantages

  • Limited number of input/output channels (12 in total)
  • May require additional components for complex applications

Working Principles

The 74ALB16244DGVRE4 operates by receiving input signals on its A1-A9 and B1-B12 pins. These signals are then buffered and amplified before being transmitted to the corresponding Y1-Y12 output pins. The bi-directional data flow allows for seamless communication between different components of an electronic system. The output enable (OE) pins control the activation of the buffer, enabling or disabling the signal transmission.

Detailed Application Field Plans

The 74ALB16244DGVRE4 finds extensive use in various electronic applications, including: - Data communication systems - Computer peripherals - Industrial automation - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu 74ALB16244DGVRE4 u tehničkim rješenjima

Sure! Here are 10 common questions and answers related to the application of 74ALB16244DGVRE4 in technical solutions:

  1. Q: What is the 74ALB16244DGVRE4? A: The 74ALB16244DGVRE4 is a 16-bit buffer/driver with 3-state outputs, commonly used in digital logic circuits.

  2. Q: What is the purpose of using the 74ALB16244DGVRE4 in a technical solution? A: The 74ALB16244DGVRE4 is used to amplify and buffer digital signals, ensuring proper signal integrity and driving capability.

  3. Q: What voltage levels does the 74ALB16244DGVRE4 support? A: The 74ALB16244DGVRE4 supports a wide range of voltage levels, typically from 2.3V to 3.6V.

  4. Q: How many inputs and outputs does the 74ALB16244DGVRE4 have? A: The 74ALB16244DGVRE4 has 16 inputs and 16 outputs.

  5. Q: Can the 74ALB16244DGVRE4 handle high-speed data transmission? A: Yes, the 74ALB16244DGVRE4 is designed to operate at high speeds, making it suitable for applications requiring fast data transmission.

  6. Q: Is the 74ALB16244DGVRE4 compatible with other logic families? A: Yes, the 74ALB16244DGVRE4 is compatible with various logic families, including TTL, CMOS, and LVTTL.

  7. Q: Does the 74ALB16244DGVRE4 have built-in protection features? A: Yes, the 74ALB16244DGVRE4 includes built-in ESD protection to safeguard against electrostatic discharge.

  8. Q: Can I use the 74ALB16244DGVRE4 in both commercial and industrial applications? A: Yes, the 74ALB16244DGVRE4 is suitable for both commercial and industrial applications due to its wide operating temperature range.

  9. Q: What is the power supply voltage required for the 74ALB16244DGVRE4? A: The 74ALB16244DGVRE4 typically operates with a power supply voltage of 2.3V to 3.6V.

  10. Q: Are there any specific layout considerations when using the 74ALB16244DGVRE4? A: Yes, it is recommended to follow the manufacturer's guidelines for proper PCB layout, including minimizing trace lengths and providing adequate decoupling capacitors near the device.

Please note that the answers provided here are general and may vary depending on the specific application and requirements.