TDK Corporation
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
NTCG063JF223JTBX
Pogledaj detalje Podatkovne tablice

NTCG063JF223JTBX

Introduction

The NTCG063JF223JTBX is a thermistor belonging to the category of electronic components. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Components
  • Use: Temperature Sensing and Control
  • Characteristics: High sensitivity to temperature changes, small size, and low cost
  • Package: Surface Mount Device (SMD)
  • Essence: Negative Temperature Coefficient (NTC) Thermistor
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Resistance: 22kΩ at 25°C
  • Tolerance: ±5%
  • Operating Temperature Range: -40°C to 125°C
  • Maximum Power Rating: 50mW
  • Thermal Time Constant: 7 seconds

Detailed Pin Configuration

The NTCG063JF223JTBX has two terminals with a standard SMD layout. The pin configuration is as follows: 1. Terminal 1: Connected to one end of the thermistor element 2. Terminal 2: Connected to the other end of the thermistor element

Functional Features

  • Temperature Sensing: Provides accurate temperature measurement in various applications
  • Temperature Compensation: Used for compensating temperature variations in circuits
  • Inrush Current Limiting: Can be used to limit inrush current in power supply circuits

Advantages and Disadvantages

Advantages

  • High sensitivity to temperature changes
  • Small size enables integration into compact designs
  • Cost-effective solution for temperature sensing and control applications

Disadvantages

  • Limited precision compared to other temperature sensing technologies
  • Susceptible to self-heating effects at higher currents

Working Principles

The NTCG063JF223JTBX operates based on the principle of negative temperature coefficient, where its resistance decreases as the temperature increases. This characteristic makes it suitable for temperature sensing and compensation in electronic circuits.

Detailed Application Field Plans

The NTCG063JF223JTBX finds applications in various fields including: - Consumer Electronics: Temperature monitoring in mobile devices, laptops, and home appliances - Automotive: In-cabin temperature sensing and climate control systems - Industrial Control: Temperature compensation in industrial automation equipment - Medical Devices: Temperature monitoring in medical equipment and devices

Detailed and Complete Alternative Models

Some alternative models to the NTCG063JF223JTBX include: - NTCG063JF103FTBX - NTCG063JF473FTBX - NTCG063JF104FTBX

In conclusion, the NTCG063JF223JTBX is a versatile thermistor with applications across various industries due to its temperature sensing and control capabilities.

[Word Count: 398]

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu NTCG063JF223JTBX u tehničkim rješenjima

  1. What is NTCG063JF223JTBX?

    • NTCG063JF223JTBX is a type of NTC thermistor, which is a temperature-sensitive resistor that exhibits a decrease in resistance with an increase in temperature.

  2. What are the typical applications of NTCG063JF223JTBX?

    • NTCG063JF223JTBX is commonly used in temperature sensing and compensation, inrush current limiting, and temperature control circuits in various electronic devices and systems.

  3. What is the resistance-temperature characteristic of NTCG063JF223JTBX?

    • NTCG063JF223JTBX has a negative temperature coefficient, meaning its resistance decreases as the temperature increases.

  4. What is the operating temperature range of NTCG063JF223JTBX?

    • The operating temperature range of NTCG063JF223JTBX typically spans from -40°C to 125°C, making it suitable for a wide range of environmental conditions.

  5. How does NTCG063JF223JTBX contribute to inrush current limiting?

    • NTCG063JF223JTBX can be used to limit inrush current by presenting a higher resistance at lower temperatures, effectively reducing the initial surge of current when a device is powered on.

  6. Can NTCG063JF223JTBX be used for temperature compensation in electronic circuits?

    • Yes, NTCG063JF223JTBX is often employed for temperature compensation to maintain stable performance of electronic components across varying temperatures.

  7. What are the key electrical characteristics of NTCG063JF223JTBX?

    • Some key electrical characteristics include its resistance value at room temperature, its thermal time constant, and its power rating, all of which are important considerations for its application in technical solutions.

  8. Are there any precautions to consider when using NTCG063JF223JTBX in a circuit?

    • It's important to ensure proper thermal management to avoid self-heating effects, and to protect the NTC thermistor from excessive mechanical stress or environmental factors that could affect its performance.

  9. How does NTCG063JF223JTBX compare to other types of NTC thermistors?

    • NTCG063JF223JTBX may have specific advantages such as its size, accuracy, or response time compared to other NTC thermistors, depending on the application requirements.

  10. Where can I find detailed technical specifications and application notes for NTCG063JF223JTBX?

    • Detailed technical specifications and application notes for NTCG063JF223JTBX can typically be found in the product datasheet provided by the manufacturer, offering comprehensive information for its integration into technical solutions.