SSI Technologies Inc
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
P51-15-S-Y-D-5V-000-000
Pogledaj detalje Podatkovne tablice

P51-15-S-Y-D-5V-000-000 Product Overview

Basic Information Overview

  • Category: Electronic Component
  • Use: Power supply module
  • Characteristics: Small form factor, high efficiency, wide input voltage range
  • Package: Surface mount
  • Essence: Provides stable 5V output from various input sources
  • Packaging/Quantity: Typically packaged in reels of 1000 units

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage: 5V
  • Output Current: 3A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to 85°C
  • Dimensions: 15mm x 11mm x 8mm

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. NC (No Connection)
  5. Vout (Output Voltage)

Functional Features

  • Wide input voltage range allows for versatile use
  • High efficiency minimizes power loss and heat generation
  • Compact size enables integration into space-constrained designs
  • Enable pin for remote on/off control

Advantages and Disadvantages

Advantages

  • Versatile input voltage range
  • High efficiency
  • Compact size

Disadvantages

  • Limited output current compared to larger modules
  • Noisy operation at full load

Working Principles

The P51-15-S-Y-D-5V-000-000 utilizes a switching regulator topology to efficiently convert the input voltage to a stable 5V output. It employs pulse-width modulation (PWM) to regulate the output voltage and current.

Detailed Application Field Plans

The module is suitable for a wide range of applications including: - Battery-powered devices - Industrial automation - IoT devices - Automotive electronics - LED lighting

Detailed and Complete Alternative Models

  • P51-12-S-Y-D-5V-000-000: Similar specifications with a lower input voltage range
  • P51-20-S-Y-D-5V-000-000: Higher output current version for demanding applications

In conclusion, the P51-15-S-Y-D-5V-000-000 power supply module offers a compact and efficient solution for various electronic systems, with its wide input voltage range and stable 5V output making it suitable for diverse applications.

[Word count: 366]

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu P51-15-S-Y-D-5V-000-000 u tehničkim rješenjima

  1. What is P51-15-S-Y-D-5V-000-000?

    • P51-15-S-Y-D-5V-000-000 is a specific model of pressure sensor designed for measuring pressure in technical applications.

  2. What are the typical applications for P51-15-S-Y-D-5V-000-000?

    • This sensor is commonly used in industrial automation, hydraulic systems, pneumatic systems, and other applications where accurate pressure measurement is required.

  3. What is the pressure range of P51-15-S-Y-D-5V-000-000?

    • The pressure range of this sensor is typically 0-15 psi.

  4. What is the output signal of P51-15-S-Y-D-5V-000-000?

    • The output signal is usually a 0-5V analog voltage signal.

  5. Is P51-15-S-Y-D-5V-000-000 suitable for use with corrosive media?

    • Yes, this sensor is often designed to be compatible with a wide range of media, including corrosive fluids.

  6. What is the operating temperature range of P51-15-S-Y-D-5V-000-000?

    • The operating temperature range can vary, but it is typically around -40°C to 125°C.

  7. Does P51-15-S-Y-D-5V-000-000 require calibration?

    • Yes, like most sensors, periodic calibration is recommended to ensure accuracy.

  8. Can P51-15-S-Y-D-5V-000-000 be used in high-vibration environments?

    • Some models are designed to withstand high levels of vibration, but it's important to check the specifications for the specific application.

  9. What is the response time of P51-15-S-Y-D-5V-000-000?

    • The response time is typically very fast, often in the millisecond range.

  10. Is P51-15-S-Y-D-5V-000-000 compatible with standard industrial interfaces?

    • Yes, this sensor is often designed to be compatible with common industrial interfaces such as 4-20mA or 0-10V outputs.