Schurter Inc.
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
0034.6815
Pogledaj detalje Podatkovne tablice

0034.6815 Product Overview

Product Identification

  • Product Name: 0034.6815
  • Category: Electronic Component
  • Use: Voltage Regulator
  • Characteristics: High precision, low dropout voltage, compact size
  • Package: SOT-23
  • Essence: Regulates input voltage to a stable output voltage
  • Packaging/Quantity: Typically sold in reels of 3000 units

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage: 1.8V to 5.0V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 130mV at 100mA load
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. Vin (Input)
  2. Vout (Output)
  3. GND (Ground)

Functional Features

  • Provides a stable output voltage despite fluctuations in the input voltage
  • Low dropout voltage ensures efficient use of available power
  • Compact size makes it suitable for space-constrained applications

Advantages and Disadvantages

Advantages

  • High precision regulation
  • Low dropout voltage
  • Small form factor

Disadvantages

  • Limited maximum output current
  • Restricted input voltage range

Working Principles

The 0034.6815 voltage regulator operates by comparing the output voltage to a reference voltage and adjusting the pass device to maintain a constant output voltage.

Detailed Application Field Plans

  • Portable electronic devices
  • Battery-powered applications
  • IoT devices
  • Wearable technology

Detailed and Complete Alternative Models

  • 0034.6816
  • 0034.6817
  • 0034.6818

In conclusion, the 0034.6815 voltage regulator offers high precision regulation and a compact form factor, making it suitable for various low-power applications. However, its limited maximum output current and input voltage range should be considered when selecting an appropriate voltage regulator for a specific application.

[Word Count: 288]

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu 0034.6815 u tehničkim rješenjima

  1. What is the application of 0034.6815 in technical solutions?

    • 0034.6815 is a specific numerical value that may be used in technical calculations, such as in engineering, physics, or mathematics.

  2. How is 0034.6815 used in electrical engineering?

    • In electrical engineering, 0034.6815 could represent a voltage, current, resistance, or any other relevant parameter in circuit analysis and design.

  3. Can 0034.6815 be applied in mechanical engineering?

    • Yes, 0034.6815 might be used to represent measurements, dimensions, forces, or other quantities in mechanical engineering applications.

  4. In what context would 0034.6815 be utilized in software development?

    • In software development, 0034.6815 could be used as a placeholder value, constant, or input parameter in algorithms, simulations, or mathematical models.

  5. Is 0034.6815 commonly encountered in civil engineering calculations?

    • Civil engineering applications may involve using 0034.6815 to represent distances, loads, material properties, or other relevant parameters in structural analysis and design.

  6. How does 0034.6815 relate to fluid dynamics or hydraulics?

    • In fluid dynamics or hydraulics, 0034.6815 might be employed to denote pressure, flow rates, viscosity, or other fluid properties in technical computations.

  7. Are there specific standards or units associated with 0034.6815 in technical solutions?

    • The units and standards associated with 0034.6815 would depend on the specific context and the physical quantities it represents.

  8. Can 0034.6815 be used in control systems or automation engineering?

    • Yes, 0034.6815 could be utilized in control systems or automation engineering to represent sensor readings, actuator outputs, control signals, or system parameters.

  9. How might 0034.6815 be integrated into mathematical modeling or simulations?

    • In mathematical modeling or simulations, 0034.6815 could serve as an initial condition, boundary value, or input parameter in solving differential equations or performing numerical analyses.

  10. What precautions should be taken when using 0034.6815 in technical solutions?

    • It's important to ensure that the units, dimensions, and context of 0034.6815 are correctly interpreted and applied within the specific technical domain to avoid errors or misinterpretations.