Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
R5F21386CDFP#30
Product Overview
- Category: Microcontroller
- Use: Embedded systems, IoT devices, consumer electronics
- Characteristics: High-performance, low-power consumption, compact size
- Package: R5F21386CDFP#30
- Essence: A microcontroller designed for various applications requiring efficient processing and control capabilities.
- Packaging/Quantity: Available in a single package with a quantity of 1.
Specifications
- Architecture: 32-bit RISC
- Clock Speed: Up to 100 MHz
- Flash Memory: 256 KB
- RAM: 32 KB
- Operating Voltage: 2.7V - 5.5V
- I/O Pins: 48
- Communication Interfaces: UART, SPI, I2C, USB
- Analog-to-Digital Converter (ADC): 12-bit, 8 channels
- Timers: 16-bit, 4 channels
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The R5F21386CDFP#30 microcontroller has the following pin configuration:

Functional Features
- High-performance processing capabilities for efficient execution of complex tasks.
- Low-power consumption, making it suitable for battery-powered devices.
- Compact size allows for integration into space-constrained designs.
- Versatile communication interfaces enable seamless connectivity with other devices.
- Built-in analog-to-digital converter for precise measurement of external signals.
- Multiple timers for accurate timing and event generation.
Advantages and Disadvantages
Advantages
- Powerful processing capabilities enable efficient execution of complex tasks.
- Low-power consumption extends battery life in portable devices.
- Compact size allows for integration into small form factor designs.
- Versatile communication interfaces facilitate seamless connectivity.
- Built-in analog-to-digital converter simplifies external signal measurement.
- Multiple timers provide accurate timing and event generation.
Disadvantages
- Limited flash memory and RAM compared to higher-end microcontrollers.
- Relatively fewer I/O pins may restrict the number of peripherals that can be connected simultaneously.
- Operating temperature range may not be suitable for extreme environments.
Working Principles
The R5F21386CDFP#30 microcontroller operates based on a 32-bit RISC architecture. It executes instructions fetched from its flash memory, which contains the program code. The microcontroller's clock speed determines the rate at which instructions are executed. It interacts with external devices through its I/O pins and communication interfaces.
Detailed Application Field Plans
The R5F21386CDFP#30 microcontroller finds applications in various fields, including:
- Industrial automation: Control systems, motor control, and monitoring devices.
- Internet of Things (IoT): Smart home devices, environmental sensors, and wearable technology.
- Consumer electronics: Remote controls, gaming consoles, and audio/video equipment.
- Automotive: Infotainment systems, engine control units, and dashboard displays.
- Medical devices: Patient monitoring systems, diagnostic equipment, and portable medical devices.
Detailed and Complete Alternative Models
- R5F21384CDFP#30: Similar to R5F21386CDFP#30 but with reduced flash memory and RAM.
- R5F21382CDFP#30: Lower-cost variant with further reduced flash memory and RAM.
- R5F21380CDFP#30: Basic version with minimal flash memory and RAM.
These alternative models offer varying levels of performance and cost to cater to different application requirements.
Word count: 410 words
Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu R5F21386CDFP#30 u tehničkim rješenjima
Sure! Here are 10 common questions and answers related to the application of R5F21386CDFP#30 in technical solutions:
Q: What is R5F21386CDFP#30?
A: R5F21386CDFP#30 is a microcontroller from the Renesas R5F21 series, specifically designed for technical solutions.
Q: What are the key features of R5F21386CDFP#30?
A: Some key features include a high-performance CPU, on-chip flash memory, multiple communication interfaces, and various peripherals.
Q: What technical solutions can R5F21386CDFP#30 be used for?
A: R5F21386CDFP#30 can be used in a wide range of applications such as industrial automation, consumer electronics, automotive systems, and IoT devices.
Q: How much flash memory does R5F21386CDFP#30 have?
A: R5F21386CDFP#30 has a built-in flash memory capacity of X kilobytes (replace X with the actual value).
Q: Can R5F21386CDFP#30 support real-time operating systems (RTOS)?
A: Yes, R5F21386CDFP#30 is capable of running real-time operating systems, making it suitable for time-critical applications.
Q: What communication interfaces are available on R5F21386CDFP#30?
A: R5F21386CDFP#30 supports interfaces like UART, SPI, I2C, CAN, USB, and Ethernet, enabling seamless connectivity with other devices.
Q: Does R5F21386CDFP#30 have analog-to-digital converters (ADC)?
A: Yes, R5F21386CDFP#30 has built-in ADC channels, allowing it to interface with analog sensors and acquire analog data.
Q: Can R5F21386CDFP#30 operate in low-power modes?
A: Yes, R5F21386CDFP#30 offers various low-power modes, enabling energy-efficient operation and extending battery life in portable devices.
Q: Is R5F21386CDFP#30 programmable in C/C++ languages?
A: Yes, R5F21386CDFP#30 can be programmed using C/C++ languages, which are widely used in embedded systems development.
Q: Are development tools available for programming R5F21386CDFP#30?
A: Yes, Renesas provides a comprehensive set of development tools, including an integrated development environment (IDE) and debugging tools, specifically designed for programming R5F21386CDFP#30.
Please note that the answers provided here are general and may vary depending on the specific documentation and datasheets provided by the manufacturer.