Panasonic Electronic Components
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
ERT-J0EV104J
Pogledaj detalje Podatkovne tablice

ERT-J0EV104J Product Encyclopedia Entry

Product Overview

Category

The ERT-J0EV104J belongs to the category of electronic components.

Use

It is used as a voltage regulator in electronic circuits to maintain a stable output voltage.

Characteristics

  • Regulates input voltage to a specific level
  • Low dropout voltage
  • High accuracy
  • Thermal shutdown protection

Package

The ERT-J0EV104J comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide a stable and regulated voltage output.

Packaging/Quantity

It is typically packaged in reels containing a specific quantity, such as 1000 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage: 3.3V
  • Maximum Output Current: 1A
  • Dropout Voltage: 300mV at 1A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The ERT-J0EV104J has three pins: 1. Vin (Input Voltage) 2. Vout (Output Voltage) 3. GND (Ground)

Functional Features

  • Voltage regulation
  • Overcurrent protection
  • Thermal shutdown
  • Low dropout voltage

Advantages

  • Stable output voltage
  • Wide input voltage range
  • Thermal protection for safety
  • Small form factor

Disadvantages

  • Limited maximum output current
  • Sensitive to external noise

Working Principles

The ERT-J0EV104J uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage.

Detailed Application Field Plans

This voltage regulator is commonly used in various electronic devices, including: - Battery-powered devices - IoT (Internet of Things) applications - Portable consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the ERT-J0EV104J include: - ERT-K0EV105K - ERT-N0EV106N - ERT-P0EV107P

In conclusion, the ERT-J0EV104J is a versatile voltage regulator with precise regulation capabilities, making it suitable for a wide range of electronic applications.

[Word count: 298]

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu ERT-J0EV104J u tehničkim rješenjima

  1. What is ERT-J0EV104J?

    • ERT-J0EV104J is a specific type of electronic component, often used in technical solutions for its electrical resistance and other properties.

  2. What are the key specifications of ERT-J0EV104J?

    • The key specifications of ERT-J0EV104J include its resistance value, power rating, tolerance, temperature coefficient, and package type.

  3. How is ERT-J0EV104J typically used in technical solutions?

    • ERT-J0EV104J is commonly used as a resistor in various electronic circuits and applications, such as voltage dividers, current limiting, and signal conditioning.

  4. What are the recommended operating conditions for ERT-J0EV104J?

    • ERT-J0EV104J is typically designed to operate within certain temperature ranges, voltage limits, and current ratings, which should be adhered to for optimal performance.

  5. Are there any common issues or failure modes associated with ERT-J0EV104J?

    • Common issues with ERT-J0EV104J may include overheating, exceeding power ratings, or exposure to environmental factors that could affect its performance.

  6. Can ERT-J0EV104J be used in high-frequency applications?

    • ERT-J0EV104J's frequency response and parasitic effects should be considered when using it in high-frequency applications, as it may not be suitable for all scenarios.

  7. What are the alternatives to ERT-J0EV104J if it's not available?

    • Alternatives to ERT-J0EV104J may include other resistors with similar specifications, provided they meet the requirements of the specific technical solution.

  8. How can ERT-J0EV104J be soldered onto a circuit board?

    • Proper soldering techniques, including temperature profiles and soldering materials, should be followed to ensure reliable connections and prevent damage to ERT-J0EV104J.

  9. What are the potential sources for procuring ERT-J0EV104J?

    • ERT-J0EV104J can be procured from authorized distributors, manufacturers, or reputable suppliers specializing in electronic components.

  10. Are there any application notes or reference designs available for using ERT-J0EV104J?

    • Manufacturers or industry resources may provide application notes, reference designs, or technical documentation to assist in the proper application of ERT-J0EV104J in various technical solutions.