ON Semiconductor
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
PN4393_D75Z
Pogledaj detalje Podatkovne tablice

PN4393_D75Z

Product Overview

Category

The PN4393_D75Z belongs to the category of field-effect transistors (FETs).

Use

It is commonly used as a switching device in electronic circuits.

Characteristics

  • Low power consumption
  • High input impedance
  • Fast switching speed

Package

The PN4393_D75Z is typically available in a TO-92 package.

Essence

This FET is essential for controlling the flow of current in electronic circuits.

Packaging/Quantity

It is usually packaged in reels with varying quantities, depending on the supplier.

Specifications

  • Drain-Source Voltage (VDS): 30V
  • Gate-Source Voltage (VGS): ±20V
  • Drain Current (ID): 600mA
  • Power Dissipation (PD): 350mW
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The PN4393_D75Z has three pins: 1. Source (S) 2. Gate (G) 3. Drain (D)

Functional Features

  • Low input capacitance
  • High gain
  • Low noise

Advantages and Disadvantages

Advantages

  • Low power consumption
  • High input impedance
  • Fast switching speed

Disadvantages

  • Limited maximum drain-source voltage
  • Moderate drain current capability

Working Principles

The PN4393_D75Z operates based on the principle of field-effect modulation of the conductivity of a semiconductor channel.

Detailed Application Field Plans

The PN4393_D75Z is widely used in various applications, including: - Audio amplifiers - Switching circuits - Signal processing

Detailed and Complete Alternative Models

Some alternative models to PN4393_D75Z include: - 2N7000 - BS170 - IRF510

In conclusion, the PN4393_D75Z is a versatile field-effect transistor with low power consumption, high input impedance, and fast switching speed. Its application spans across various electronic circuits, making it an essential component in modern electronics.

[Word count: 288]

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu PN4393_D75Z u tehničkim rješenjima

  1. What is PN4393_D75Z?

    • PN4393_D75Z is a small-signal N-channel JFET (junction field-effect transistor) commonly used in electronic circuits for switching and amplification.

  2. What are the key specifications of PN4393_D75Z?

    • PN4393_D75Z has a maximum drain-source voltage of 30V, a maximum gate-source voltage of 30V, and a continuous drain current of 50mA.

  3. How can PN4393_D75Z be used in technical solutions?

    • PN4393_D75Z can be used in various technical solutions such as signal amplification, analog switches, voltage-controlled resistors, and low-power applications.

  4. What are the typical applications of PN4393_D75Z?

    • Typical applications of PN4393_D75Z include audio amplifiers, signal processing circuits, sensor interfaces, and voltage-controlled oscillators.

  5. What are the important considerations when using PN4393_D75Z in a circuit?

    • It's important to consider the biasing requirements, input impedance matching, and voltage limitations to ensure proper operation of PN4393_D75Z in a circuit.

  6. Can PN4393_D75Z be used in high-frequency applications?

    • PN4393_D75Z is not typically recommended for high-frequency applications due to its relatively low cutoff frequency and potential for increased noise at higher frequencies.

  7. What are the alternatives to PN4393_D75Z for specific applications?

    • Alternatives to PN4393_D75Z for specific applications include other JFETs with different characteristics such as lower noise, higher gain, or better high-frequency performance.

  8. How should PN4393_D75Z be handled and stored to maintain its performance?

    • PN4393_D75Z should be handled with ESD (electrostatic discharge) precautions and stored in anti-static packaging to prevent damage from static electricity.

  9. What are the thermal considerations for PN4393_D75Z in a circuit?

    • Thermal considerations include ensuring proper heat dissipation and avoiding excessive temperature that could affect the JFET's performance and reliability.

  10. Where can I find detailed application notes and reference designs for PN4393_D75Z?

    • Detailed application notes and reference designs for PN4393_D75Z can be found in the manufacturer's datasheets, application guides, and technical support resources.