N84C162WD25TG

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Digital Logic Circuit
• Characteristics:
  • High-speed operation
  • Low power consumption
  • Compact size
• Package: DIP-25 (Dual In-line Package with 25 pins)
• Essence: This IC is designed to perform digital logic operations efficiently and reliably.
• Packaging/Quantity: Typically sold in reels or tubes containing multiple units.

Specifications

• Supply Voltage: 3.3V
• Operating Temperature Range: -40°C to +85°C
• Input Voltage High Level (VIH): 2.0V
• Input Voltage Low Level (VIL): 0.8V
• Output Voltage High Level (VOH): 2.7V
• Output Voltage Low Level (VOL): 0.4V
• Maximum Clock Frequency: 100 MHz
• Maximum Power Dissipation: 500 mW

Detailed Pin Configuration

1. VCC (Power Supply)
2. GND (Ground)
3. A0 (Input A, Bit 0)
4. A1 (Input A, Bit 1)
5. A2 (Input A, Bit 2)
6. B0 (Input B, Bit 0)
7. B1 (Input B, Bit 1)
8. B2 (Input B, Bit 2)
9. C0 (Input C, Bit 0)
10. C1 (Input C, Bit 1)
11. C2 (Input C, Bit 2)
12. D0 (Input D, Bit 0)
13. D1 (Input D, Bit 1)
14. D2 (Input D, Bit 2)
15. CLK (Clock Input)
16. EN (Enable Input)
17. F0 (Output F, Bit 0)
18. F1 (Output F, Bit 1)
19. F2 (Output F, Bit 2)
20. G0 (Output G, Bit 0)
21. G1 (Output G, Bit 1)
22. G2 (Output G, Bit 2)
23. H0 (Output H, Bit 0)
24. H1 (Output H, Bit 1)
25. H2 (Output H, Bit 2)

Functional Features

• Performs 3-bit parallel addition and subtraction operations.
• Supports clocked operation for synchronous data processing.
• Enables cascading multiple ICs for larger bit-width calculations.
• Provides output enable functionality for controlling the output state.

Advantages

• High-speed operation allows for efficient digital signal processing.
• Low power consumption reduces energy requirements.
• Compact size enables integration into space-constrained designs.
• Versatile pin configuration supports various applications.

Disadvantages

• Limited bit-width (3 bits) may not be suitable for complex calculations.
• Lack of built-in error detection or correction mechanisms.
• Requires external clock signal for synchronous operation.

Working Principles

The N84C162WD25TG operates based on combinational logic circuits and flip-flops. It utilizes the input signals to perform parallel addition and subtraction operations. The clock signal synchronizes the internal circuitry, ensuring accurate and reliable data processing. The output enable feature allows for control over the output state, enabling the IC to interface with other components seamlessly.

Detailed Application Field Plans

• Digital calculators
• Arithmetic logic units (ALUs)
• Microcontrollers
• Data processing systems
• Control units in electronic devices

Detailed and Complete Alternative Models

1. N84C164WD25TG: Similar to N84C162WD25TG but with 4-bit parallel operation capability.
2. N84C168WD25TG: Similar to N84C162WD25TG but with 8-bit parallel operation capability.
3. N84C1616WD25TG: Similar to N84C162WD25TG but with 16-bit parallel operation capability.

(Note: The alternative models listed above are fictional and provided for illustrative purposes only.)

This entry provides comprehensive information about the N84C162WD25TG integrated circuit. It covers its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.