ON Semiconductor
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
MPSW42
Pogledaj detalje Podatkovne tablice

MPSW42 Transistor

Product Overview

Category

The MPSW42 transistor belongs to the category of small-signal transistors.

Use

It is commonly used for amplification and switching purposes in electronic circuits.

Characteristics

  • Low power dissipation
  • High current gain
  • Small package size

Package

The MPSW42 transistor is typically available in a TO-92 package.

Essence

This transistor is essential for low-power applications where amplification or switching is required.

Packaging/Quantity

It is usually packaged in reels, tubes, or bulk quantities depending on the manufacturer.

Specifications

  • Collector-Base Voltage (VCBO): 300V
  • Collector-Emitter Voltage (VCEO): 300V
  • Emitter-Base Voltage (VEBO): 5V
  • Collector Current (IC): 500mA
  • Power Dissipation (PD): 625mW
  • Transition Frequency (ft): 100MHz
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The MPSW42 transistor has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High voltage capability
  • Low leakage current
  • Fast switching speed

Advantages

  • Suitable for high-voltage applications
  • Compact size
  • Low power dissipation

Disadvantages

  • Limited maximum current handling capability
  • Sensitive to temperature variations

Working Principles

The MPSW42 operates based on the principles of bipolar junction transistors, utilizing the control of current flow between its terminals to amplify or switch electronic signals.

Detailed Application Field Plans

The MPSW42 transistor finds extensive use in the following applications: - Audio amplifiers - Signal processing circuits - Switching circuits - Oscillator circuits

Detailed and Complete Alternative Models

Some alternative models to the MPSW42 transistor include: - MPSA42 - MPSW06 - MPSW56 - 2N3904

In conclusion, the MPSW42 transistor is a versatile component with a wide range of applications in electronic circuits, offering high voltage capability and compact size. While it has limitations in current handling and temperature sensitivity, its advantages make it a popular choice for various low-power electronic designs.

[Word count: 309]

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu MPSW42 u tehničkim rješenjima

  1. What is MPSW42?

    • MPSW42 is a PNP silicon transistor commonly used for switching and amplification in electronic circuits.

  2. What are the key specifications of MPSW42?

    • The key specifications of MPSW42 include a maximum collector current of 500mA, a maximum collector-emitter voltage of 300V, and a maximum power dissipation of 625mW.

  3. How can MPSW42 be used for switching applications?

    • MPSW42 can be used as a switch to control the flow of current in a circuit by turning it on or off based on the input signal.

  4. In what type of technical solutions is MPSW42 commonly employed?

    • MPSW42 is commonly employed in applications such as relay drivers, LED drivers, and general purpose switching circuits.

  5. What are the typical operating conditions for MPSW42?

    • The typical operating conditions for MPSW42 include a collector current of 100mA, a collector-emitter voltage of 20V, and a base current of 5mA.

  6. Can MPSW42 be used for amplification purposes?

    • Yes, MPSW42 can be used as an amplifier to increase the strength of a weak input signal in various electronic circuits.

  7. What are the thermal considerations when using MPSW42 in technical solutions?

    • It is important to consider the thermal dissipation of MPSW42 to ensure that it operates within its specified temperature range and does not overheat.

  8. Are there any common alternative transistors to MPSW42?

    • Some common alternative transistors to MPSW42 include BC557, 2N3906, and 2N4403, which have similar characteristics and can be used in its place.

  9. How should MPSW42 be connected in a circuit for optimal performance?

    • MPSW42 should be connected according to its datasheet specifications, ensuring proper biasing and connections to achieve the desired functionality.

  10. What are the typical failure modes of MPSW42 and how can they be mitigated?

    • Typical failure modes of MPSW42 include overheating, exceeding maximum ratings, and improper handling. These can be mitigated by following proper design guidelines, thermal management, and ESD precautions.