Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
MPSA43RLRAG

MPSA43RLRAG

Product Overview

Category

The MPSA43RLRAG belongs to the category of bipolar transistors.

Use

It is commonly used as a general-purpose amplifier or switch in electronic circuits.

Characteristics

  • Low noise
  • High current gain
  • Medium power dissipation

Package

The MPSA43RLRAG is typically available in a TO-92 package.

Essence

This transistor is essential for amplifying and switching signals in various electronic applications.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Collector-Base Voltage (VCBO): 80V
  • Collector-Emitter Voltage (VCEO): 80V
  • Emitter-Base Voltage (VEBO): 5V
  • Collector Current (IC): 500mA
  • Power Dissipation (PD): 625mW
  • Transition Frequency (fT): 100MHz
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The MPSA43RLRAG has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High current gain
  • Low noise
  • Suitable for low-power applications

Advantages

  • Versatile use in amplification and switching
  • Low noise performance
  • Wide operating temperature range

Disadvantages

  • Limited power dissipation capability
  • Relatively low collector current compared to other transistors

Working Principles

The MPSA43RLRAG operates based on the principles of bipolar junction transistors, where the flow of current between the collector and emitter is controlled by the base current.

Detailed Application Field Plans

The MPSA43RLRAG is commonly used in the following applications: - Audio amplifiers - Signal amplification circuits - Switching circuits - Oscillators

Detailed and Complete Alternative Models

Some alternative models to the MPSA43RLRAG include: - BC547 - 2N3904 - 2N2222 - BC337

In conclusion, the MPSA43RLRAG is a versatile bipolar transistor with applications in various electronic circuits, offering high current gain and low noise performance. While it has limitations in power dissipation and collector current, it remains a popular choice for low-power amplification and switching applications.

[Word Count: 306]

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu MPSA43RLRAG u tehničkim rješenjima

  1. What is the MPSA43RLRAG transistor used for?

    • The MPSA43RLRAG is a high voltage NPN bipolar junction transistor commonly used in amplifier and switching applications.
  2. What are the key specifications of the MPSA43RLRAG transistor?

    • The MPSA43RLRAG has a maximum collector-emitter voltage of 200V, a continuous collector current of 500mA, and a power dissipation of 625mW.
  3. Can the MPSA43RLRAG be used for audio amplifier circuits?

    • Yes, the MPSA43RLRAG is suitable for small-signal audio amplifier circuits due to its high voltage and current capabilities.
  4. Is the MPSA43RLRAG suitable for switching applications?

    • Yes, the MPSA43RLRAG can be used in low-power switching applications due to its moderate current and voltage ratings.
  5. What are the typical operating conditions for the MPSA43RLRAG?

    • The MPSA43RLRAG operates within a temperature range of -55°C to 150°C and is typically used in low to moderate frequency applications.
  6. Can the MPSA43RLRAG be used in voltage regulator circuits?

    • While it's not commonly used in voltage regulator circuits, the MPSA43RLRAG can be utilized in certain low-power voltage regulation applications.
  7. Does the MPSA43RLRAG require any specific biasing configuration?

    • The MPSA43RLRAG typically requires a standard NPN transistor biasing configuration with appropriate base current and voltage levels.
  8. Are there any common alternative transistors to the MPSA43RLRAG?

    • Some alternative transistors with similar characteristics include the MPSA42RLRAG and the BC547B, but it's important to check the specific requirements of the circuit before substituting.
  9. What are the typical applications where the MPSA43RLRAG is commonly used?

    • The MPSA43RLRAG is often used in audio amplifiers, signal processing circuits, low-power switching applications, and general purpose amplification.
  10. What are the recommended storage and handling precautions for the MPSA43RLRAG?

    • It's advisable to store the MPSA43RLRAG in a cool, dry environment and handle it with proper ESD (electrostatic discharge) precautions to avoid damage.