Pogledajte specifikacije za pojedinosti o proizvodu.
MPSA29_D27Z
Product Overview
Category
MPSA29_D27Z belongs to the category of semiconductor devices.
Use
It is commonly used as a general-purpose amplifier in electronic circuits.
Characteristics
- Low noise
- High current gain
- Suitable for low-power applications
Package
MPSA29_D27Z is available in a TO-92 package.
Essence
The essence of MPSA29_D27Z lies in its ability to amplify weak signals with minimal distortion.
Packaging/Quantity
It is typically packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Maximum Collector-Emitter Voltage: 75V
- Maximum Collector Current: 100mA
- DC Current Gain (hFE): 100-500
- Power Dissipation: 625mW
Detailed Pin Configuration
MPSA29_D27Z has three pins: 1. Emitter (E) 2. Base (B) 3. Collector (C)
Functional Features
- Amplification of weak signals
- Low noise operation
- Compatibility with low-power circuits
Advantages and Disadvantages
Advantages
- High current gain
- Low noise performance
- Versatile application in various electronic circuits
Disadvantages
- Limited power handling capacity
- Susceptible to thermal runaway in high-power applications
Working Principles
MPSA29_D27Z operates based on the principles of bipolar junction transistors, where the flow of current between the collector and emitter is controlled by the base current.
Detailed Application Field Plans
MPSA29_D27Z finds extensive use in the following applications: - Audio amplifiers - Signal processing circuits - Sensor interfaces - Oscillator circuits
Detailed and Complete Alternative Models
Some alternative models to MPSA29_D27Z include: - BC547 - 2N3904 - 2N2222
In conclusion, MPSA29_D27Z is a versatile semiconductor device known for its low noise and high current gain characteristics, making it suitable for a wide range of low-power electronic applications.
[Word count: 294]
Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu MPSA29_D27Z u tehničkim rješenjima
What is MPSA29_D27Z?
- MPSA29_D27Z is a high-voltage NPN bipolar junction transistor (BJT) commonly used in electronic circuits for amplification and switching applications.
What are the typical applications of MPSA29_D27Z?
- MPSA29_D27Z is often used in audio amplifiers, voltage regulators, motor control circuits, and other high-voltage applications.
What is the maximum collector-emitter voltage rating of MPSA29_D27Z?
- The maximum collector-emitter voltage rating of MPSA29_D27Z is typically around 75V.
What is the maximum collector current of MPSA29_D27Z?
- The maximum collector current of MPSA29_D27Z is usually around 800mA.
How do I properly bias MPSA29_D27Z in a circuit?
- Proper biasing of MPSA29_D27Z involves setting the base current to ensure the transistor operates within its linear region for amplification or in the saturation region for switching applications.
What are the key characteristics of MPSA29_D27Z that make it suitable for high-voltage applications?
- MPSA29_D27Z has a high breakdown voltage and can handle relatively high collector currents, making it suitable for high-voltage applications.
Can MPSA29_D27Z be used in low-power applications as well?
- Yes, MPSA29_D27Z can be used in low-power applications, but its high-voltage capabilities make it particularly well-suited for high-power circuits.
Are there any specific considerations for heat dissipation when using MPSA29_D27Z in a circuit?
- Due to its potential for handling higher currents, proper heat sinking may be necessary to ensure the transistor does not overheat in high-power applications.
What are some common alternatives to MPSA29_D27Z for similar applications?
- Some common alternatives include 2N4403, BC558, and BC327, which are also high-voltage NPN transistors suitable for similar applications.
Where can I find detailed datasheets and application notes for MPSA29_D27Z?
- Datasheets and application notes for MPSA29_D27Z can typically be found on semiconductor manufacturer websites or distributor platforms.