Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
CAT5113VI-50-GT3

CAT5113VI-50-GT3

Product Overview

Category

CAT5113VI-50-GT3 belongs to the category of electronic components.

Use

This product is commonly used in electronic circuits for various applications.

Characteristics

  • Package: The CAT5113VI-50-GT3 comes in a compact surface-mount package.
  • Essence: It is an adjustable digital potentiometer that can be programmed to provide variable resistance.
  • Packaging/Quantity: The product is typically packaged in reels and available in large quantities.

Specifications

The specifications of CAT5113VI-50-GT3 are as follows:

  • Resistance Range: 0Ω to 50kΩ
  • Resolution: 256 steps
  • Supply Voltage: 2.7V to 5.5V
  • Temperature Range: -40°C to +85°C
  • Interface: Serial (I2C)

Detailed Pin Configuration

The pin configuration of CAT5113VI-50-GT3 is as follows:

  1. VCC: Power supply voltage input
  2. GND: Ground reference
  3. SDA: Serial data input/output
  4. SCL: Serial clock input
  5. A0: Address selection bit 0
  6. A1: Address selection bit 1
  7. WP: Write protect input
  8. H/L: High/Low terminal of the resistor element

Functional Features

The CAT5113VI-50-GT3 offers the following functional features:

  • Digital Control: The potentiometer can be digitally controlled through the I2C interface, allowing precise adjustment of resistance.
  • Non-Volatile Memory: The device retains its programmed resistance value even when power is removed.
  • Low Power Consumption: The CAT5113VI-50-GT3 operates with low power consumption, making it suitable for battery-powered applications.
  • High Reliability: The product is designed to provide reliable and accurate resistance values over a wide temperature range.

Advantages and Disadvantages

Advantages: - Precise Resistance Control: The CAT5113VI-50-GT3 allows for fine-tuning of resistance, enabling precise circuit adjustments. - Compact Size: The surface-mount package ensures space-saving integration into electronic circuits. - Non-Volatile Memory: The non-volatile memory feature eliminates the need for reprogramming after power loss.

Disadvantages: - Limited Resistance Range: The maximum resistance value of 50kΩ may not be suitable for certain applications requiring higher resistance values. - Serial Interface Dependency: The potentiometer's functionality relies on the availability of an I2C interface in the system.

Working Principles

The CAT5113VI-50-GT3 operates based on the principle of digitally controlled resistance. It consists of a resistor network and digital control circuitry. The digital control circuitry receives commands through the I2C interface, which instructs the potentiometer to adjust its resistance value accordingly. This adjustment is achieved by selectively connecting or disconnecting resistive elements within the network, resulting in the desired resistance output.

Detailed Application Field Plans

The CAT5113VI-50-GT3 finds applications in various fields, including:

  1. Audio Equipment: The potentiometer can be used for volume control in audio amplifiers and mixers.
  2. Industrial Automation: It can be employed in industrial control systems for precise resistance adjustments.
  3. Test and Measurement Instruments: The CAT5113VI-50-GT3 is suitable for calibration and fine-tuning purposes in test equipment.
  4. Consumer Electronics: It can be utilized in devices such as televisions, gaming consoles, and home appliances that require adjustable resistance.

Detailed and Complete Alternative Models

Some alternative models to CAT5113VI-50-GT3 include:

  1. CAT5113WI-50-GT3: Similar to CAT5113VI-50-GT3 but with a different package.
  2. CAT5113ZI-50-GT3: Offers the same functionality but with extended temperature range.
  3. CAT5113LI-50-GT3: Lower resistance range variant of CAT5113VI-50-GT3.

These alternative models provide similar features and can be considered based on specific requirements.

Word count: 457 words

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu CAT5113VI-50-GT3 u tehničkim rješenjima

Sure! Here are 10 common questions and answers related to the application of CAT5113VI-50-GT3 in technical solutions:

  1. Question: What is CAT5113VI-50-GT3?
    Answer: CAT5113VI-50-GT3 is a digital potentiometer IC (Integrated Circuit) manufactured by ON Semiconductor.

  2. Question: What is the purpose of using CAT5113VI-50-GT3 in technical solutions?
    Answer: CAT5113VI-50-GT3 is commonly used as a variable resistor in various electronic circuits to control voltage, current, or signal levels.

  3. Question: What is the maximum resistance range of CAT5113VI-50-GT3?
    Answer: The maximum resistance range of CAT5113VI-50-GT3 is 50 kilohms.

  4. Question: Can CAT5113VI-50-GT3 be used in both analog and digital applications?
    Answer: Yes, CAT5113VI-50-GT3 can be used in both analog and digital applications due to its digital control interface.

  5. Question: What is the supply voltage range for CAT5113VI-50-GT3?
    Answer: The supply voltage range for CAT5113VI-50-GT3 is typically between 2.7V and 5.5V.

  6. Question: How many taps does CAT5113VI-50-GT3 have?
    Answer: CAT5113VI-50-GT3 has 128 taps, allowing for precise adjustment of resistance.

  7. Question: Is CAT5113VI-50-GT3 suitable for low-power applications?
    Answer: Yes, CAT5113VI-50-GT3 is designed for low-power applications, making it energy-efficient.

  8. Question: Can CAT5113VI-50-GT3 be used in temperature-sensitive environments?
    Answer: Yes, CAT5113VI-50-GT3 has a wide operating temperature range of -40°C to +85°C, making it suitable for various environments.

  9. Question: Does CAT5113VI-50-GT3 have non-volatile memory?
    Answer: Yes, CAT5113VI-50-GT3 has non-volatile memory, allowing it to retain its settings even when power is removed.

  10. Question: What are some common applications of CAT5113VI-50-GT3?
    Answer: CAT5113VI-50-GT3 is commonly used in audio equipment, instrumentation, industrial control systems, and other electronic devices where precise resistance adjustment is required.

Please note that the answers provided here are general and may vary depending on specific application requirements.