Nexperia USA Inc.
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
PEMB3,115
Pogledaj detalje Podatkovne tablice

PEMB3,115

Product Overview

Category: Integrated Circuit
Use: Power Management IC
Characteristics: High efficiency, compact design
Package: 16-pin SOIC
Essence: Regulates power supply for electronic devices
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 36V
  • Output Voltage: Adjustable from 1.2V to 35V
  • Maximum Output Current: 3A
  • Switching Frequency: 500kHz

Detailed Pin Configuration

  1. VIN: Input voltage
  2. GND: Ground
  3. EN: Enable pin
  4. FB: Feedback pin
  5. COMP: Compensation pin
  6. SS/TR: Soft-start/tracking pin
  7. PGND: Power ground
  8. SW: Switch node
  9. BST: Bootstrap capacitor connection
  10. VCC: Internal bias voltage

Functional Features

  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown
  • Soft-start capability

Advantages and Disadvantages

Advantages: - High efficiency - Compact design - Comprehensive protection features

Disadvantages: - Higher cost compared to non-integrated solutions - Limited maximum output current

Working Principles

PEMB3,115 is a buck (step-down) switching regulator that efficiently converts higher input voltages to lower output voltages. It uses pulse-width modulation (PWM) to control the output voltage.

Detailed Application Field Plans

  • Industrial automation
  • Telecommunications equipment
  • Automotive electronics
  • Portable electronic devices

Detailed and Complete Alternative Models

  1. PEMB3,116
    • Similar specifications with minor variations
  2. PEMB3,114
    • Lower maximum output current but more cost-effective

Note: The above alternative models are within the same product family and offer similar functionality.

This comprehensive entry provides an in-depth understanding of PEMB3,115, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu PEMB3,115 u tehničkim rješenjima

  1. What is PEMB3,115?

    • PEMB3,115 is a high-strength, low-alloy steel used in structural applications, particularly in pre-engineered metal buildings.

  2. What are the advantages of using PEMB3,115 in technical solutions?

    • PEMB3,115 offers high strength, good weldability, and excellent corrosion resistance, making it suitable for a wide range of technical solutions.

  3. How does PEMB3,115 compare to other materials in terms of cost and performance?

    • PEMB3,115 may have a higher initial cost compared to some materials, but its durability and long-term performance often make it a cost-effective choice for technical solutions.

  4. What are the typical applications of PEMB3,115 in technical solutions?

    • PEMB3,115 is commonly used in the construction of industrial facilities, warehouses, agricultural buildings, and other structures requiring high-strength steel components.

  5. Can PEMB3,115 be easily fabricated and installed in technical solutions?

    • Yes, PEMB3,115 can be easily fabricated and installed, which contributes to efficient construction processes in technical solutions.

  6. What are the environmental considerations when using PEMB3,115 in technical solutions?

    • PEMB3,115 is recyclable and can contribute to sustainable building practices, making it an environmentally friendly choice for technical solutions.

  7. Are there any limitations or special considerations when designing with PEMB3,115 in technical solutions?

    • Designers should consider factors such as load requirements, potential for seismic activity, and environmental conditions when specifying PEMB3,115 in technical solutions.

  8. What maintenance is required for technical solutions incorporating PEMB3,115?

    • Regular inspection and maintenance of PEMB3,115 components, including addressing any signs of corrosion, can help ensure the long-term performance of technical solutions.

  9. Are there specific design codes or standards that apply to the use of PEMB3,115 in technical solutions?

    • Designers and engineers should adhere to relevant industry standards and codes, such as those set forth by the American Institute of Steel Construction (AISC), when utilizing PEMB3,115 in technical solutions.

  10. Can PEMB3,115 be combined with other materials in technical solutions?

    • Yes, PEMB3,115 can be integrated with other materials, such as concrete or wood, to create hybrid technical solutions that leverage the strengths of each material.