The 74AUP1G374GM,132 belongs to the category of integrated circuits (ICs).
This IC is commonly used in electronic devices for signal amplification and data storage purposes.
The 74AUP1G374GM,132 is available in a small package, typically measuring 2mm x 2mm. It is designed to be surface-mounted on printed circuit boards (PCBs).
The essence of this product lies in its ability to store and amplify digital signals efficiently within a compact form factor.
The 74AUP1G374GM,132 is usually packaged in reels or tubes, containing a quantity of 3000 units per package.
The 74AUP1G374GM,132 has a total of 6 pins, each serving a specific function:
The 74AUP1G374GM,132 operates based on the principles of digital logic. It utilizes a D-type flip-flop with a transparent latch to store and amplify digital signals. The clock pulse input triggers the latch, allowing the data input to be transferred to the output pin. The output enable pin controls the output state, enabling or disabling the signal transmission.
The 74AUP1G374GM,132 finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Digital cameras - Portable gaming consoles - Wearable devices
In these devices, it is used for tasks such as signal amplification, data storage, and synchronization.
Some alternative models that offer similar functionality to the 74AUP1G374GM,132 include: - 74HC374: This IC offers comparable features and pin configuration. - SN74LVC1G374: Another alternative with similar characteristics and performance.
These alternative models can be considered based on specific project requirements and availability.
Word count: 450 words
Question: What is the function of the 74AUP1G374GM,132 in technical solutions?
Answer: The 74AUP1G374GM,132 is a single D-type flip-flop with 3-state output. It can be used for storing and transferring data in digital circuits.
Question: What is the operating voltage range of the 74AUP1G374GM,132?
Answer: The 74AUP1G374GM,132 operates within a voltage range of 0.8V to 3.6V.
Question: Can the 74AUP1G374GM,132 be used in battery-powered applications?
Answer: Yes, the low operating voltage range of the 74AUP1G374GM,132 makes it suitable for battery-powered applications.
Question: How many flip-flops are there in the 74AUP1G374GM,132?
Answer: The 74AUP1G374GM,132 consists of a single flip-flop.
Question: What is the maximum clock frequency supported by the 74AUP1G374GM,132?
Answer: The 74AUP1G374GM,132 can support clock frequencies up to 500 MHz.
Question: Does the 74AUP1G374GM,132 have any power-saving features?
Answer: Yes, the 74AUP1G374GM,132 has a power-down mode that reduces power consumption when not in use.
Question: Can the 74AUP1G374GM,132 be used in high-speed data transfer applications?
Answer: Yes, the 74AUP1G374GM,132 is designed for high-speed operation and can be used in data transfer applications.
Question: What is the output drive strength of the 74AUP1G374GM,132?
Answer: The 74AUP1G374GM,132 has a typical output drive strength of ±24 mA.
Question: Is the 74AUP1G374GM,132 compatible with other logic families?
Answer: Yes, the 74AUP1G374GM,132 is compatible with both TTL and CMOS logic families.
Question: Can the 74AUP1G374GM,132 be used in automotive applications?
Answer: Yes, the 74AUP1G374GM,132 is AEC-Q100 qualified, making it suitable for automotive applications.