Microsemi Corporation
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
SMBG5928AE3/TR13
Pogledaj detalje Podatkovne tablice

SMBG5928AE3/TR13

Product Overview

  • Category: Voltage Regulator
  • Use: Regulating voltage in electronic circuits
  • Characteristics: High efficiency, low dropout voltage, compact size
  • Package: SOT-23
  • Essence: Regulates input voltage to a stable output voltage
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage: 1.8V
  • Output Current: 150mA
  • Dropout Voltage: 190mV at 100mA
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. GND
  2. VOUT
  3. VIN

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit protection

Advantages

  • Small package size
  • Wide input voltage range
  • Low dropout voltage
  • Low power consumption

Disadvantages

  • Limited output current
  • Restricted operating temperature range

Working Principles

The SMBG5928AE3/TR13 is a voltage regulator that maintains a stable output voltage despite fluctuations in the input voltage. It achieves this by using a feedback mechanism to adjust the output voltage based on the input.

Detailed Application Field Plans

This voltage regulator is suitable for various battery-powered applications, such as portable devices, IoT devices, and handheld instruments. It can also be used in automotive electronics and industrial control systems.

Detailed and Complete Alternative Models

  • LM1117
  • MCP1703
  • XC6206

Note: The above information provides a comprehensive overview of the SMBG5928AE3/TR13 voltage regulator, including its specifications, features, advantages, disadvantages, working principles, application field plans, and alternative models.

[Word Count: 270]

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu SMBG5928AE3/TR13 u tehničkim rješenjima

  1. What is SMBG5928AE3/TR13?

    • SMBG5928AE3/TR13 is a specific model of semiconductor component used in technical solutions, such as electronic circuits and devices.

  2. What are the key specifications of SMBG5928AE3/TR13?

    • The key specifications of SMBG5928AE3/TR13 include its voltage rating, current rating, power dissipation, and package type.

  3. How is SMBG5928AE3/TR13 typically used in technical solutions?

    • SMBG5928AE3/TR13 is commonly used for voltage regulation, transient voltage suppression, or overvoltage protection in various electronic applications.

  4. What are the recommended operating conditions for SMBG5928AE3/TR13?

    • The recommended operating conditions for SMBG5928AE3/TR13 may include temperature range, maximum forward voltage, and reverse leakage current.

  5. Are there any application notes or reference designs available for using SMBG5928AE3/TR13?

    • Yes, manufacturers often provide application notes, reference designs, and datasheets that offer guidance on integrating SMBG5928AE3/TR13 into technical solutions.

  6. What are the common failure modes associated with SMBG5928AE3/TR13?

    • Common failure modes may include thermal runaway, voltage breakdown, or excessive leakage current, which can occur under certain operating conditions.

  7. Can SMBG5928AE3/TR13 be used in high-frequency applications?

    • SMBG5928AE3/TR13's frequency response and capacitance characteristics should be considered when using it in high-frequency applications to ensure proper performance.

  8. What are the industry standards or certifications relevant to SMBG5928AE3/TR13?

    • SMBG5928AE3/TR13 may comply with industry standards such as JEDEC, AEC-Q101, or specific safety certifications depending on the intended application.

  9. How does SMBG5928AE3/TR13 compare to similar components in terms of performance and cost?

    • Comparing SMBG5928AE3/TR13 to similar components involves evaluating factors such as clamping voltage, response time, reliability, and overall cost-effectiveness.

  10. Are there any known design considerations or best practices when using SMBG5928AE3/TR13 in technical solutions?

    • Design considerations may include layout optimization, thermal management, and ensuring proper voltage derating to maximize the performance and longevity of SMBG5928AE3/TR13 in a given application.