MXLP4KE200A

Product Overview

Category: Integrated Circuits
Use: Power Management IC
Characteristics: Low power consumption, high efficiency
Package: 16-pin QFN package
Essence: Regulates and manages power supply
Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

Input Voltage: 3V to 5.5V
Output Voltage: 0.8V to 3.3V
Output Current: Up to 2A
Efficiency: Up to 95%
Operating Temperature: -40°C to 85°C

Detailed Pin Configuration

VIN (Input Voltage)
GND (Ground)
SW (Switching Node)
FB (Feedback)
EN (Enable)
PG (Power Good)
COMP (Compensation)
SS (Soft Start)
AGND (Analog Ground)
VOUT (Output Voltage)

Functional Features

Wide input voltage range
High efficiency at light loads
Overcurrent protection
Thermal shutdown protection
Soft start for controlled startup

Advantages and Disadvantages

Advantages: - Low power consumption - Small form factor - Wide operating temperature range

Disadvantages: - Limited output current compared to some alternatives - Higher cost compared to traditional linear regulators

Working Principles

The MXLP4KE200A is a buck regulator that efficiently converts higher input voltages to lower output voltages. It uses pulse-width modulation (PWM) to control the output voltage and maintain high efficiency across a wide range of loads.

Detailed Application Field Plans

The MXLP4KE200A is ideal for use in battery-powered devices, such as portable electronics, IoT devices, and handheld instruments. Its low power consumption and high efficiency make it suitable for applications where maximizing battery life is critical.

Detailed and Complete Alternative Models

Alternative Model 1: MXLP4KE300B
- Higher output current capability
- Similar package and pin configuration
Alternative Model 2: MXLP4KE100C
- Lower cost
- Slightly reduced efficiency

In conclusion, the MXLP4KE200A is a versatile power management IC with a wide range of applications, offering high efficiency and low power consumption. While it may have limitations in terms of output current and cost, its performance and features make it a strong choice for many power regulation needs.

[Word Count: 346]

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu MXLP4KE200A u tehničkim rješenjima

What is MXLP4KE200A?
- MXLP4KE200A is a high-performance transient voltage suppressor diode designed to protect sensitive electronics from voltage spikes and surges.
What is the maximum clamping voltage of MXLP4KE200A?
- The maximum clamping voltage of MXLP4KE200A is 324V at 5A.
What is the peak pulse power dissipation of MXLP4KE200A?
- The peak pulse power dissipation of MXLP4KE200A is 4000W for a 10/1000μs waveform.
What are the typical applications of MXLP4KE200A?
- MXLP4KE200A is commonly used in surge protection for telecommunications equipment, industrial control systems, automotive electronics, and power supplies.
What is the operating temperature range of MXLP4KE200A?
- MXLP4KE200A has an operating temperature range of -55°C to +175°C.
Does MXLP4KE200A meet industry standards for surge protection?
- Yes, MXLP4KE200A meets industry standards such as IEC 61000-4-5 for surge protection.
Can MXLP4KE200A be used in automotive applications?
- Yes, MXLP4KE200A is suitable for use in automotive electronics for transient voltage suppression.
What is the packaging type of MXLP4KE200A?
- MXLP4KE200A is available in a DO-214AC (SMA) package.
Is MXLP4KE200A RoHS compliant?
- Yes, MXLP4KE200A is RoHS compliant, making it suitable for use in environmentally conscious designs.
Are there any recommended layout considerations for using MXLP4KE200A in a circuit?
- It is recommended to minimize the length and area of the PCB traces connected to MXLP4KE200A and to provide adequate thermal relief for the device during soldering.