Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
5KP40CA-TP

5KP40CA-TP Product Overview

Introduction

The 5KP40CA-TP belongs to the category of transient voltage suppressor diodes. These diodes are widely used in electronic circuits to protect sensitive components from voltage spikes and transients. This entry provides a comprehensive overview of the 5KP40CA-TP, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diode
  • Use: Protection against voltage spikes and transients in electronic circuits
  • Characteristics: High surge capability, low clamping voltage, fast response time
  • Package: Taped and reeled
  • Essence: Safeguarding sensitive electronic components
  • Packaging/Quantity: Available in reels with varying quantities

Specifications

  • Part Number: 5KP40CA-TP
  • Peak Pulse Power: 5000W
  • Breakdown Voltage: 40V
  • Operating Temperature Range: -55°C to +175°C
  • Polarity: Unidirectional
  • Mounting Type: Surface Mount
  • Package / Case: DO-201AD

Detailed Pin Configuration

The 5KP40CA-TP has a standard DO-201AD package with two leads. The anode is connected to one lead, while the cathode is connected to the other lead.

Functional Features

  • Transient Voltage Suppression: Effectively clamps transient voltages to protect downstream components.
  • Fast Response Time: Rapid reaction to voltage spikes ensures minimal impact on the circuit.
  • High Surge Capability: Capable of withstanding high surge currents without degradation.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time
  • High surge capability

Disadvantages

  • Unidirectional protection only
  • Requires careful consideration of polarity during installation

Working Principles

When a voltage transient occurs, the 5KP40CA-TP conducts and clamps the transient voltage to a safe level, preventing damage to the connected circuitry. This is achieved through the use of avalanche breakdown.

Detailed Application Field Plans

The 5KP40CA-TP is commonly used in various electronic systems, including: - Power supplies - Communication equipment - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

  • Alternative Model 1: 5KP36CA-TP
  • Alternative Model 2: 5KP48CA-TP
  • Alternative Model 3: 5KP60CA-TP

These alternative models offer similar transient voltage suppression capabilities with varying breakdown voltages to suit different application requirements.

In conclusion, the 5KP40CA-TP transient voltage suppressor diode is a crucial component in protecting electronic circuits from voltage spikes and transients. Its high surge capability, fast response time, and effective transient voltage suppression make it an essential part of various electronic systems.

[Word Count: 436]

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu 5KP40CA-TP u tehničkim rješenjima

  1. What is the maximum peak pulse power of 5KP40CA-TP?

    • The maximum peak pulse power of 5KP40CA-TP is 5000 watts.
  2. What is the breakdown voltage of 5KP40CA-TP?

    • The breakdown voltage of 5KP40CA-TP is 44.2V to 48.8V.
  3. What are the typical applications for 5KP40CA-TP?

    • Typical applications for 5KP40CA-TP include surge protection in telecommunications equipment, industrial and consumer electronics, and automotive systems.
  4. What is the clamping voltage of 5KP40CA-TP?

    • The clamping voltage of 5KP40CA-TP is 58.1V at 77.8A.
  5. What is the operating temperature range of 5KP40CA-TP?

    • The operating temperature range of 5KP40CA-TP is -55°C to +175°C.
  6. What is the reverse stand-off voltage of 5KP40CA-TP?

    • The reverse stand-off voltage of 5KP40CA-TP is 40V.
  7. Is 5KP40CA-TP RoHS compliant?

    • Yes, 5KP40CA-TP is RoHS compliant.
  8. What is the package type of 5KP40CA-TP?

    • 5KP40CA-TP is available in a DO-201AD (DO-27) package.
  9. What are the key features of 5KP40CA-TP?

    • Key features of 5KP40CA-TP include high surge capability, low clamping voltage, and fast response time.
  10. Does 5KP40CA-TP have any certifications?

    • Yes, 5KP40CA-TP is certified to meet various industry standards such as UL recognition under the component program of Underwriters Laboratories.