Meixin Integrated
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
MAX98306ETD+T
Pogledaj detalje Podatkovne tablice

MAX98306ETD+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Audio Amplifier
  • Characteristics: High efficiency, compact size, low power consumption
  • Package: 28-TSSOP
  • Essence: Class D amplifier
  • Packaging/Quantity: Tape & Reel (2500 units)

Specifications

  • Power Supply Voltage: 2.5V to 5.5V
  • Output Power: 3.2W at 5V, 10% THD+N, 4Ω load
  • Efficiency: 85%
  • Signal-to-Noise Ratio (SNR): 103dB
  • THD+N: 0.15% at 1W, 1kHz, 8Ω load

Detailed Pin Configuration

The MAX98306ETD+T has a 28-pin TSSOP package with the following pin configuration: 1. GND 2. SHDN 3. BTL 4. OUT- 5. OUT+ 6. VDD 7. GAIN 8. BYPASS 9. MODE 10. MCLK 11. LRCK 12. DIN 13. CLK 14. SDOUT 15. SCLK 16. SDIN 17. LOUT- 18. LOUT+ 19. LIN- 20. LIN+ 21. AGND 22. PGND 23. BST 24. FB 25. COMP 26. PVDD 27. PVDD 28. PVDD

Functional Features

  • Single-supply operation
  • I2S/TDM digital audio input
  • Short-circuit and thermal-overload protection
  • Low quiescent current

Advantages and Disadvantages

Advantages

  • High efficiency
  • Small form factor
  • Low power consumption
  • Integrated protection features

Disadvantages

  • Limited output power compared to some larger amplifiers
  • Requires careful PCB layout for optimal performance

Working Principles

The MAX98306ETD+T is a Class D audio amplifier that uses pulse-width modulation (PWM) to amplify audio signals. It operates by rapidly switching the output transistors on and off to generate the amplified audio signal.

Detailed Application Field Plans

The MAX98306ETD+T is suitable for various portable and battery-powered audio applications, including: - Portable speakers - Headphone amplifiers - Gaming accessories - Smart home devices

Detailed and Complete Alternative Models

Some alternative models to the MAX98306ETD+T include: - MAX98357A: Higher-power Class D amplifier with integrated volume control - TPA3116D2: Class D amplifier with higher output power and wider supply voltage range

This comprehensive entry provides an in-depth understanding of the MAX98306ETD+T, covering its specifications, features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu MAX98306ETD+T u tehničkim rješenjima

  1. What is the MAX98306ETD+T?

    • The MAX98306ETD+T is a Class D amplifier with integrated boost converter, designed for driving speakers in portable and low-power applications.

  2. What is the maximum output power of the MAX98306ETD+T?

    • The MAX98306ETD+T can deliver up to 3.2W of continuous output power into a 4Ω load with a 5V supply.

  3. What is the input voltage range for the MAX98306ETD+T?

    • The input voltage range for the MAX98306ETD+T is typically 2.5V to 5.5V.

  4. What are the key features of the MAX98306ETD+T?

    • Some key features of the MAX98306ETD+T include integrated boost converter, low quiescent current, short-circuit and thermal protection, and small package size.

  5. What type of applications is the MAX98306ETD+T suitable for?

    • The MAX98306ETD+T is suitable for applications such as portable speakers, gaming headsets, and other low-power audio solutions.

  6. What is the efficiency of the MAX98306ETD+T?

    • The efficiency of the MAX98306ETD+T can reach up to 85% under typical operating conditions.

  7. Does the MAX98306ETD+T require external components for operation?

    • Yes, the MAX98306ETD+T requires external components such as input capacitors, output filter components, and feedback resistors for proper operation.

  8. What is the typical shutdown current of the MAX98306ETD+T?

    • The typical shutdown current of the MAX98306ETD+T is very low, typically around 0.1µA.

  9. Can the MAX98306ETD+T operate from a single supply voltage?

    • Yes, the MAX98306ETD+T is designed to operate from a single supply voltage, making it suitable for battery-powered applications.

  10. What are the recommended operating conditions for the MAX98306ETD+T?

    • The recommended operating conditions for the MAX98306ETD+T include a supply voltage of 2.5V to 5.5V, a load impedance of 4Ω, and a temperature range of -40°C to +85°C.