Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
LM4041CEX3-1.2+T

LM4041CEX3-1.2+T

Product Overview

Category

The LM4041CEX3-1.2+T belongs to the category of voltage references.

Use

This product is commonly used as a precision voltage reference in various electronic circuits.

Characteristics

  • High accuracy: The LM4041CEX3-1.2+T provides a highly accurate output voltage.
  • Low temperature coefficient: It exhibits a low temperature coefficient, ensuring stable performance across different operating conditions.
  • Low power consumption: This voltage reference consumes minimal power, making it suitable for battery-powered applications.
  • Wide operating range: It operates within a wide voltage range, allowing for versatile use in different circuit designs.

Package

The LM4041CEX3-1.2+T is available in a small SOT-23 package, which is compact and easy to integrate into circuit boards.

Essence

The essence of the LM4041CEX3-1.2+T lies in its ability to provide a precise and stable voltage reference, ensuring accurate operation of electronic circuits.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel or 250 units per tube.

Specifications

  • Output Voltage: 1.2V
  • Initial Accuracy: ±0.5%
  • Temperature Coefficient: 50ppm/°C
  • Supply Voltage Range: 1.8V to 12V
  • Quiescent Current: 60µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The LM4041CEX3-1.2+T has three pins:

  1. VOUT: Output pin, connected to the load or circuit requiring a stable voltage reference.
  2. GND: Ground pin, connected to the common ground of the circuit.
  3. VIN: Input pin, connected to the power supply voltage.

Functional Features

  • High precision: The LM4041CEX3-1.2+T provides a highly accurate and stable output voltage, ensuring precise operation of electronic circuits.
  • Low power consumption: It consumes minimal power, making it suitable for low-power applications and extending battery life.
  • Wide operating range: This voltage reference can operate within a wide voltage range, accommodating various circuit designs.
  • Low temperature coefficient: The LM4041CEX3-1.2+T exhibits a low temperature coefficient, minimizing voltage variations with temperature changes.

Advantages and Disadvantages

Advantages

  • High accuracy and stability
  • Low power consumption
  • Compact package size
  • Wide operating voltage range
  • Low temperature coefficient

Disadvantages

  • Limited output voltage options (fixed at 1.2V)

Working Principles

The LM4041CEX3-1.2+T utilizes a bandgap voltage reference circuit to generate a precise and stable output voltage. It compensates for temperature variations by employing temperature-dependent current sources and voltage references. These components work together to maintain a consistent output voltage regardless of temperature changes.

Detailed Application Field Plans

The LM4041CEX3-1.2+T finds application in various fields, including:

  1. Precision analog circuits: It is commonly used as a voltage reference in precision analog-to-digital converters (ADCs), digital-to-analog converters (DACs), and operational amplifiers (op-amps).
  2. Sensor interfaces: The LM4041CEX3-1.2+T provides a stable reference voltage for sensor interfaces, ensuring accurate measurements.
  3. Battery-powered devices: Its low power consumption makes it ideal for use in battery-powered devices such as portable electronics, medical devices, and IoT devices.
  4. Industrial control systems: This voltage reference is suitable for industrial control systems that require precise and stable voltage references for accurate operation.

Detailed and Complete Alternative Models

  1. LM4040CIZ-1.2: This model offers similar specifications and performance to the LM4041CEX3-1.2+T but comes in a different package (TO-92).
  2. LT1236ACS8-1.2: This alternative model provides a 1.2V output voltage with high accuracy and low temperature coefficient. It is available in an SO-8 package.
  3. MAX6126AASA25: This voltage reference offers a 2.5V output voltage with excellent accuracy and stability. It comes in an SO-8 package.

These alternative models can be considered based on specific application requirements and package preferences.

Word count: 550 words

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu LM4041CEX3-1.2+T u tehničkim rješenjima

Sure! Here are 10 common questions and answers related to the application of LM4041CEX3-1.2+T in technical solutions:

Q1: What is LM4041CEX3-1.2+T? A1: LM4041CEX3-1.2+T is a precision voltage reference IC that provides a stable and accurate 1.2V output voltage.

Q2: What is the typical application of LM4041CEX3-1.2+T? A2: LM4041CEX3-1.2+T is commonly used as a voltage reference in various electronic circuits, such as analog-to-digital converters (ADCs), digital-to-analog converters (DACs), and voltage regulators.

Q3: What is the voltage accuracy of LM4041CEX3-1.2+T? A3: The voltage accuracy of LM4041CEX3-1.2+T is typically ±0.1% at room temperature.

Q4: What is the operating temperature range of LM4041CEX3-1.2+T? A4: LM4041CEX3-1.2+T can operate within a temperature range of -40°C to +85°C.

Q5: Can LM4041CEX3-1.2+T be used in battery-powered applications? A5: Yes, LM4041CEX3-1.2+T is suitable for battery-powered applications due to its low quiescent current consumption.

Q6: What is the maximum current that LM4041CEX3-1.2+T can source or sink? A6: LM4041CEX3-1.2+T can source or sink up to 15mA of current.

Q7: Is LM4041CEX3-1.2+T available in different package options? A7: Yes, LM4041CEX3-1.2+T is available in a SOT-23 package.

Q8: Can LM4041CEX3-1.2+T be used as a voltage reference for precision measurements? A8: Yes, LM4041CEX3-1.2+T is suitable for precision measurement applications due to its low temperature coefficient and excellent long-term stability.

Q9: Does LM4041CEX3-1.2+T require any external components for operation? A9: No, LM4041CEX3-1.2+T does not require any external components. It is a standalone voltage reference.

Q10: Can LM4041CEX3-1.2+T tolerate reverse polarity or overvoltage conditions? A10: No, LM4041CEX3-1.2+T is not designed to tolerate reverse polarity or overvoltage conditions. Proper protection circuitry should be implemented to prevent damage.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the LM4041CEX3-1.2+T datasheet and consult with the manufacturer for detailed information.