Meixin Integrated
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
DS1868-10
Pogledaj detalje Podatkovne tablice

DS1868-10

Product Overview

Category: Electronic Component
Use: Digital Potentiometer
Characteristics: Programmable, Dual Channel
Package: SOIC-16
Essence: Integrated Circuit
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Resolution: 256 Steps
  • Resistance Range: 10 kΩ
  • Supply Voltage: 2.7V to 5.5V
  • Temperature Range: -40°C to +85°C
  • Interface: Serial (SPI)
  • Non-Volatile Memory: Yes

Detailed Pin Configuration

The DS1868-10 has a total of 16 pins arranged as follows:

  1. VCC
  2. SDA
  3. SCL
  4. GND
  5. A0
  6. A1
  7. A2
  8. NC
  9. W0
  10. W1
  11. CS
  12. NC
  13. NC
  14. NC
  15. NC
  16. VSS

Functional Features

  • Dual channel digital potentiometer with 256 steps resolution
  • Programmable resistance range of 10 kΩ
  • Serial interface (SPI) for easy control and configuration
  • Non-volatile memory allows storing settings even when power is disconnected
  • Wide supply voltage range of 2.7V to 5.5V
  • Operating temperature range from -40°C to +85°C

Advantages and Disadvantages

Advantages: - High resolution provides precise control over resistance - Programmable nature allows flexibility in various applications - Non-volatile memory ensures settings are retained during power cycles - Wide supply voltage range enables compatibility with different systems

Disadvantages: - Limited resistance range may not be suitable for all applications - Serial interface may require additional circuitry for compatibility with certain microcontrollers

Working Principles

The DS1868-10 is a digital potentiometer that replaces traditional mechanical potentiometers. It consists of a resistor network and electronic switches controlled by an integrated circuit. The resistance value can be adjusted digitally using the serial interface, allowing precise control over the output voltage or current in a circuit.

Detailed Application Field Plans

The DS1868-10 finds applications in various fields, including:

  1. Audio Equipment: Volume control, tone adjustment
  2. Industrial Automation: Calibration, feedback control
  3. Test and Measurement: Signal conditioning, calibration
  4. Communication Systems: Gain control, impedance matching
  5. Consumer Electronics: Display brightness control, user interface settings

Detailed and Complete Alternative Models

  1. DS1804-010: 256 Steps, 10 kΩ, SPI Interface, SOIC-16 Package
  2. MCP4131-103E/P: 256 Steps, 10 kΩ, SPI Interface, DIP-8 Package
  3. MAX5486EUD+: 256 Steps, 10 kΩ, I²C Interface, TSSOP-14 Package
  4. AD5260BRUZ10: 256 Steps, 10 kΩ, SPI Interface, TSSOP-20 Package
  5. X9C104SIZT1: 100 Steps, 10 kΩ, I²C Interface, SOT-23-6 Package

These alternative models offer similar functionality to the DS1868-10 and can be considered based on specific requirements.

Word Count: 315 words

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu DS1868-10 u tehničkim rješenjima

Sure! Here are 10 common questions and answers related to the application of DS1868-10 in technical solutions:

  1. Q: What is DS1868-10? A: DS1868-10 is a specific model or version of a digital potentiometer integrated circuit (IC) manufactured by Maxim Integrated. It is commonly used for electronic control applications.

  2. Q: What is the purpose of DS1868-10 in technical solutions? A: The DS1868-10 is used as a digitally controlled variable resistor, allowing precise adjustment of resistance values in various electronic circuits.

  3. Q: How does DS1868-10 work? A: DS1868-10 works by using digital signals to control the resistance value across its terminals. It has internal registers that store the resistance settings and can be adjusted through a serial interface.

  4. Q: What are the key features of DS1868-10? A: Some key features of DS1868-10 include dual-channel operation, non-volatile memory for storing settings, low power consumption, and a wide range of resistance values.

  5. Q: In which technical applications can DS1868-10 be used? A: DS1868-10 can be used in various applications such as audio equipment, instrumentation, motor control, programmable voltage references, and other systems requiring precise resistance adjustments.

  6. Q: How can I interface with DS1868-10? A: DS1868-10 can be interfaced using a serial communication protocol like I2C or SPI. This allows you to send commands and data to adjust the resistance values.

  7. Q: Can DS1868-10 be used in both analog and digital circuits? A: Yes, DS1868-10 can be used in both analog and digital circuits. It provides a digital interface to control the resistance, but its output can be connected to analog components.

  8. Q: Is DS1868-10 suitable for high-frequency applications? A: DS1868-10 is not specifically designed for high-frequency applications. Its primary use is in low to moderate frequency applications where precise resistance adjustments are required.

  9. Q: Can DS1868-10 be used in harsh environments? A: DS1868-10 is not designed for harsh environments as it is typically used in indoor electronic systems. It is important to consider the operating temperature range and environmental conditions when using it.

  10. Q: Are there any alternative ICs to DS1868-10 for similar applications? A: Yes, there are other digital potentiometer ICs available from different manufacturers that can be used as alternatives to DS1868-10, such as MCP41XXX series from Microchip or AD524X series from Analog Devices.

Please note that the answers provided here are general and may vary depending on specific application requirements.